Hammer drill bit SDS Plus-5 Bosch 10 mm for rotary hammer and drill, 1 pc

Bosch SDS Plus-5 10 mm hammer drill bit is designed for use with rotary hammers and drills that accept SDS Plus shanks. This single-piece 10 mm bit is intended for drilling into concrete, masonry and natural stone and is suitable for preparing holes for anchors, fixings or light-to-medium demolition tasks. The bit incorporates Bosch's Activeteq centring tip for accurate starts and a visible wear mark to help check whether hole diameter remains within tolerance for metal anchor installation. Manufactured in Germany and certified by the PGM Masonry Drill Bit Association Board, the tool meets defined tolerances for consistent drilling performance.

Advantages

The Activeteq centring tip provides guided starts to reduce slipping and chipping at the drill entry, improving drilling accuracy. AWB brazing and hardening technology increases tip durability while helping to reduce vibration transmitted to the user. A wear mark on the flute indicates when the bit has worn beyond the acceptable diameter for anchor holes, supporting correct fastening performance. The SDS Plus shank ensures secure, quick fitting to compatible rotary hammers.

Suitable for

• Drilling 10 mm holes in concrete, brick and natural stone
• Preparing holes for metal anchors and wall plugs
• Light-to-medium demolition where small-diameter removal or hole-making is required
• Use with SDS Plus rotary hammers and compatible hammer drills

Key specifications

• Diameter: 10 mm
• Shank type: SDS Plus
• Intended materials: concrete, masonry, natural stone
• Construction features: Activeteq centring tip, AWB brazing and hardening
• Wear indication: visible wear mark for hole-diameter tolerance
• Quantity: 1 piece
• Origin: Made in Germany

How to use

Fit the 10 mm SDS Plus-5 drill bit securely into the SDS Plus chuck of a compatible rotary hammer. Select the hammer drilling mode if available and set appropriate rotation speed and impact force for the substrate. Start drilling with light pressure to allow the Activeteq centring tip to establish the hole and then apply steady, moderate pressure. Withdraw periodically to remove debris and prevent overheating. Check the wear mark periodically to confirm the bit still produces holes within the required diameter tolerance for anchors.

Usage recommendations

Use suitable personal protective equipment including safety glasses, hearing protection and dust mask when drilling concrete or masonry. For anchor installation, verify hole diameter and depth against anchor manufacturer specifications; replace the bit when the wear mark is no longer visible to maintain correct hole tolerances.