Drill Bits Bosch SDS plus-5 2608587801

SDS plus-5 Drill Bits by Bosch (2608587801) are designed for drilling in masonry and concrete with SDS plus rotary hammers. The bits feature a grooved carbide plate with notches to penetrate material more easily and reduce jamming, an Activeteq centring tip for stable starts and precise hole diameter, and AWB brazing and hardening technology to lower vibration during use. A wear mark indicates when the bit no longer meets diameter tolerance for metal anchor setting. The product carries the PGM Masonry Drill Bit Association Board test mark and is made in Germany.

Advantages

The grooved carbide plate and notches improve penetration into concrete and decrease the risk of jamming. The Activeteq centring tip provides accurate guidance for easy starts and consistent hole diameter. AWB brazing and hardening technology reduces vibration to lower operator strain. A visible wear mark helps verify remaining tolerance for metal anchors, while the PGM test mark confirms compliance with tight tolerances and drilling quality.

Suitable for

• Drilling holes in concrete
• Drilling in masonry and brick
• Use with SDS plus rotary hammers
• Preparing holes for metal anchors and fixings

Key specifications

• Brand: Bosch
• Model / MPN: 2608587801
• Shaft type: SDS plus (compatible with SDS plus holders)
• Intended materials: Concrete and masonry
• Manufacturing origin: Made in Germany
• Certification: PGM Masonry Drill Bit Association Board test mark

How to use

Fit the SDS plus shank securely into a compatible rotary hammer. Begin drilling with light pressure to let the Activeteq centring tip stabilise the bit, then apply steady force appropriate to the rotary hammer’s power. Monitor the drilling progress and withdraw occasionally to clear dust. Stop using the bit if the wear mark becomes visible or drilling accuracy degrades.

Usage recommendations

Use appropriate personal protective equipment (safety glasses, hearing protection, gloves) and ensure the rotary hammer and bit are suitable for the hole diameter and material. Replace the bit when the wear mark appears to maintain correct anchor tolerances and hole quality.