Drill bit Bosch 2608596183 for rotary hammer, 8 mm diameter, 615 mm length, single piece

Bosch 2608596183 is a single 8 mm diameter drill bit designed for rotary hammers, offering a total length of 615 mm for deep drilling in concrete and masonry. Supplied as one piece, the long shank provides extended reach for applications where standard-length bits are insufficient. The bit is intended as a replacement or spare for compatible rotary hammer models and is manufactured to Bosch quality standards to ensure proper fit and reliable drilling performance when used with appropriate hammer-drill settings.

Advantages

The 8 mm diameter combined with a 615 mm overall length allows access to deep drilling points without the need for extensions. Engineered for use with rotary hammers, the bit offers stable drilling behavior in concrete and masonry and reduces the need to change to multiple short bits. Its single-piece supply makes it suitable as a spare part for on-site tool maintenance and quick replacement.

Suitable for

• Deep through-holes in concrete and reinforced masonry
• Installation of long anchor bolts and sleeves
• Electrical and plumbing conduit routing through walls and floors
• Replacement or spare part for compatible rotary hammer models

Key specifications

• Drill diameter: 8 mm
• Total length: 615 mm
• Intended tool type: rotary hammer
• Material application: concrete and masonry
• Supply quantity: 1 piece

How to use

Select a compatible rotary hammer and set the tool to the hammer-drilling mode. Secure the drill bit in the tool’s chuck or SDS shank interface according to the hammer model’s instructions, ensuring it is locked firmly before operation. Position the drill perpendicular to the work surface, start drilling at low speed to establish the hole, then apply steady pressure and allow the hammer action to advance through the material. Withdraw the bit periodically to clear debris from deep holes and reduce heat build-up.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and dust mask when drilling. For reinforced concrete, use intermittent drilling and check for rebar before full penetration. Match drill speed and hammer settings to the material and avoid excessive side load to prevent bit wear or breakage.