Brad Point Drill Bits Bosch 2608596304 5 Piece Set

Brad point drill bits designed for precise drilling in soft and hard wood. The set contains five bits with centring tips and sharp shoulder cutters to minimise splintering and ensure accurate hole positioning. Two flutes on each bit help evacuate chips and prevent clogging for clean through-holes and pocket holes; bits have a cylindrical shank suitable for standard chucks.

Advantages

The brad point tips provide exact centring and reduce wandering on the workpiece. Sharp shoulder cutters produce tear-free hole edges and a smooth finish. Dual flutes improve chip removal and drilling speed while reducing friction and heat build-up. A cylindrical shank ensures compatibility with a wide range of drills and chucks.

Suitable for

• Drilling precise through-holes and pocket holes in softwood
• Drilling precise through-holes and pocket holes in hardwood
• General woodwork, cabinetry and joinery tasks
• Preparation of holes for dowels and fasteners

Key specifications

• Tip type: brad point (centring tip)
• Flute design: two flutes for chip evacuation
• Cutting edges: shoulder cutters for reduced splintering
• Shank: cylindrical shank for standard chucks
• Material compatibility: soft and hard wood
• Set quantity: 5 pieces

How to use

Mark the desired drill position and secure the workpiece to prevent movement. Align the brad point tip with the mark so the centring tip engages before applying pressure. Start drilling at low speed to allow the tip to bite, then increase speed as the hole progresses. Use steady pressure and allow the flutes to clear chips; withdraw the bit periodically for deeper holes to remove accumulated material.

Usage recommendations

For best results, use appropriate drill speeds for the wood type: lower speeds for hardwoods and higher speeds for softwoods. Clamp thin or brittle pieces and consider backing boards to prevent exit splintering. Keep bits sharp and clean; replace when cutting edges become dull.