Cutting disc (diamond) 230 mm Bosch Eco for Universal Turbo

Diamond cutting disc 230 mm Bosch Eco for Universal Turbo is a 230 mm diameter turbo-rim blade designed for use with angle grinders that accept 230 mm discs. The disc combines a continuous metal core with a turbo-segmented diamond rim to deliver faster cutting and good wear resistance when working with hard mineral materials. It is intended for construction and renovation tasks where high removal rate and consistent performance are required for cutting concrete, brick, tile and natural stone.

Advantages

The turbo rim profile increases cutting speed while helping to maintain a clean cut line through abrasive materials. A reinforced metal core provides stability and reduced vibration during operation, contributing to more precise cuts and longer blade life. The product is optimized to balance cutting efficiency and durability, making it suitable for repeated on-site use on masonry and stone substrates.

Suitable for

• Cutting concrete and reinforced concrete (non-structural depth)
• Cutting clay brick and paving blocks
• Trimming ceramic and porcelain tiles
• Shaping and cutting natural stone and sandstone

Key specifications

• Diameter: 230 mm
• Arbor hole diameter: compatible with standard 22.23 mm (7/8") angle grinder flanges
• Rim type: turbo-segmented diamond rim for faster material removal
• Core material: reinforced steel core for stability and reduced vibration
• Recommended tool: angle grinder suitable for 230 mm discs
• Primary application materials: concrete, brick, tile, natural stone

How to use

Mount the disc on an angle grinder that accepts 230 mm blades, ensuring the arbor fits the machine flange and the disc is oriented in the correct rotational direction. Tighten the flange securely according to the grinder manufacturer’s instructions. When cutting, use steady, controlled feed without forcing the disc; allow the diamond segments to perform the cutting. Maintain appropriate personal protective equipment: eye protection, hearing protection, dust mask and gloves. For best results on deep cuts or reinforced material, make several shallow passes rather than a single deep cut.

Usage recommendations

Use water cooling only if the disc and the angle grinder are rated for wet cutting; otherwise operate dry. Allow the disc to cool between prolonged cutting runs to avoid overheating. Inspect the disc for damage before each use and replace if segments are missing or if the core is warped.