Jigsaw blade Bosch 2608634234 Bimetal for hardwood, laminate, laminated panels, max cut 30 mm, 5 pcs

Bosch 2608634234 bimetal jigsaw blades, pack of 5, are designed for cutting hardwood, laminate and laminated panels up to a maximum depth of 30 mm. The blades combine a bimetal construction with ground and taper-ground teeth to provide wear resistance and consistent cutting performance for straight and curved cuts. Each blade follows the T 101 BF profile and a total length of 100 mm to fit compatible jigsaw models used in woodworking, renovation and installation tasks.

Advantages

The bimetal material gives these blades improved durability and resistance to heat and wear compared with standard high-carbon blades. Ground teeth and a taper-ground tooth geometry reduce cutting forces and improve chip removal for smoother edges in hardwood and laminated panels. The uniform tooth spacing and the T 101 BF tooth profile allow predictable cutting behavior for both straight and curved cuts while maintaining blade stability during use.

Suitable for

• Cutting hardwood and solid wood pieces (3–30 mm)
• Trimming laminate flooring and laminate boards (3–30 mm)
• Working with laminated panels and HPL sheets (3–30 mm)
• Cutting certain reinforced plastics and epoxy composites with thickness under 30 mm

Key specifications

• Blade material: bimetal construction for enhanced wear resistance
• Tooth design: ground teeth with taper-ground geometry for reduced cutting forces
• Tooth spacing: 2.7 mm for balanced cut speed and finish
• Total length: 100 mm
• Maximum cutting thickness: up to 30 mm depending on material
• Tooth profile: T 101 BF suitable for wood and composite panels
• Pack contents: 5 blades

How to use

Select a Bosch-compatible jigsaw that accepts T-shank blades and ensure the tool is disconnected from power before fitting the blade. Insert the blade with the teeth facing forward and secure according to the jigsaw manufacturer’s blade-clamping system. For best results set an appropriate stroke rate and feed speed for the material; use slower feed rates for hardwood and higher stroke rates for thinner laminate. Support the workpiece close to the cut line to minimise vibration and avoid twisting the blade during curved cuts.

Usage recommendations

Use personal protective equipment such as safety glasses and hearing protection. For cleaner edges on laminate and HPL, consider scoring the cut line first or use a sacrificial backing piece to prevent chipping. Replace blades when wear or tooth damage affects cut quality; bimetal blades deliver extended life but are not indestructible. Store blades dry and protected to avoid corrosion and mechanical damage.