Sabre saw blade Bosch S 930 CF Bimetal 1 pc 8 10 TPI

The Bosch S 930 CF Bimetal sabre saw blade is designed for cutting pipes and profiles in metalworking and construction tasks. Manufactured from bimetal, the blade combines flexibility and wear resistance to handle a range of metal sections and thin-walled profiles. With dual tooth counts of 8 and 10 TPI and a tooth spacing between 2.5 mm and 3.2 mm, the blade balances cutting speed and edge life for repeated use in professional and DIY environments.

Advantages

Constructed from bimetal, the blade resists fracture and tolerates bending stresses encountered when cutting hardened sections or congested profiles. The mixed tooth pitch—8 and 10 teeth per inch—provides efficient material removal while maintaining reasonable surface finish on pipes and thin profiles. The 2.5–3.2 mm tooth spacing supports both fast rough cuts and controlled cutting across varying wall thicknesses, extending blade life and reducing the need for frequent replacements.

Suitable for

• Cutting steel and non-alloy metal pipes
• Trimming metal profiles and channels
• On-site metal fabrication and repair work
• General-purpose demolition and remodeling involving metal sections

Key specifications

• Blade material: bimetal for improved toughness and wear resistance
• Tooth configuration: alternating 8 and 10 TPI for versatile cutting performance
• Tooth spacing: approximately 2.5 mm to 3.2 mm
• Recommended application: metal pipes, thin-walled profiles and structural sections

How to use

Install the blade in a compatible sabre saw or reciprocating saw according to the tool manufacturer's instructions, ensuring the blade is secured and oriented with teeth facing the workpiece. For metal cutting, clamp the workpiece firmly and mark the cut line. Start the saw at low speed to establish the cut, then increase speed as appropriate while maintaining steady feed pressure. Allow the blade to do the cutting; avoid forcing the blade through the material to prevent premature wear or breakage. After use, inspect the blade for tooth wear or damage before storing.

Usage recommendations

Use cutting fluid or coolant when cutting thicker or harder metal sections to reduce heat buildup and extend blade life. Choose appropriate speed settings for the material: lower speeds for harder metals and higher speeds for thin-walled or softer metals. Replace the blade when teeth become visibly worn, clogged, or when cutting performance declines.