Drill Bit Bosch SDS plus-7X 8mm 365mm

The Bosch EXPERT SDS plus-7X 8 mm x 365 mm drill bit is designed for rotary hammer drills and intended for heavy-duty drilling in concrete, reinforced concrete and hard stone. Built with a Full Carbide Head and Bosch Carbide Technology, the bit reduces jamming and increases tip durability for longer life compared with standard bits.

Advantages

The 4-cutter Full Carbide Head is manufactured from a single piece of carbide to resist impact and avoid weakness at the tip. Bosch welding technology creates a highly resistant connection between the carbide tip and the steel shank. This construction delivers up to three times longer life than a standard drill bit when drilling reinforced concrete and other hard materials.

Suitable for

• Drilling holes in cured and hardened reinforced concrete
• Drilling into hard natural stone such as granite and gneiss
• Fixings and installations in construction and renovation work

Key specifications

• Brand: Bosch
• Model: EXPERT SDS plus-7X
• Type: SDS plus hammer drill bit
• Diameter: 8 mm
• Total length: 365 mm
• MPN: 2608900092
• EAN: 4059952531656

How to use

Install the SDS plus shank securely into a compatible rotary hammer drill. Select hammer mode appropriate for masonry/concrete drilling and start at low speed to position the bit, then increase to normal operating speed for drilling. Apply steady axial pressure without forcing the bit; allow the carbide head to cut and the hammer action to remove material. Retract the bit periodically to clear dust from the hole and avoid overheating.

Usage recommendations

Use personal protective equipment (safety goggles, gloves, hearing protection) when drilling. Match drill length and diameter to the required fixing and material. For reinforcement bars, change drilling angle or use a rebar-cutting method if the bit binds. Store bits dry and inspect the carbide tip for wear; replace when performance decreases.