Sabre saw blade Bosch S 1750 RD Diamond 20 cm 1.25 mm

The Bosch S 1750 RD sabre saw blade is a diamond-reinforced reciprocating blade designed for cutting cement-lined cast iron pipes and fibre-reinforced plastic. With a working length of 20 cm and an overall length of 25 cm, this single-piece blade combines diamond cutting material and a slim 1.25 mm cutting thickness for controlled, precise cuts in highly abrasive and hard materials encountered in repair and replacement of water pipes.

Advantages

Diamond cutting material provides high wear resistance against abrasive mortar and hard cast iron, maintaining cutting performance in dirty or confined conditions. The 20 cm working length and 25 cm overall length give reach into trenches or tight spaces where a reciprocating saw must be used. The thin 1.25 mm kerf reduces material removal for faster, more accurate cuts and easier handling during repair work.

Suitable for

• Cutting cement-lined cast iron water pipes
• Cutting glass-fibre reinforced plastic (GRP)
• Repairs and replacements in trenches or confined spaces using a reciprocating saw
• Worksites with muddy or abrasive conditions

Key specifications

• Brand: Bosch
• Model / MPN: 2608900383 (S 1750 RD Diamond)
• Working length: 200 mm
• Overall length: 250 mm
• Maximum cutting thickness / kerf: 1.25 mm
• Material: diamond cutting edge for abrasive/hard materials
• Pack quantity: 1 piece
• EAN: 4059952534732

How to use

Fit the Bosch S 1750 RD into a compatible reciprocating (sabre) saw according to the tool manufacturer's instructions. Position the blade on the cut line and allow the saw to reach full speed before applying steady pressure; do not force the blade. Use short, controlled strokes for best results when cutting cement-lined cast iron or GRP. After cutting, inspect the blade for wear or damage and replace if the diamond edge shows significant degradation.

Usage recommendations

Use appropriate personal protective equipment (eye protection, gloves, and dust mask). For best blade life, avoid excessive bending or side loading. Keep the work area as stable and accessible as possible; when working in wet or muddy conditions, clear heavy debris from the cut line to reduce abrasive contamination.