Drill bits Bosch Expert CYL-9 MultiConstruction 6 mm, set of 10

Set of 10 Bosch Expert CYL-9 MultiConstruction drill bits, 6 mm diameter. These bits are designed for MultiConstruction applications and provide consistent 6 mm holes for general drilling tasks. The set is suitable for routine building, renovation and installation work where a reliable 6 mm drill bit is required and fits standard chucks on compatible drills.

Advantages

The Bosch Expert CYL-9 MultiConstruction drill bits offer uniform diameter and consistent performance across the set, reducing the need to re-measure or re-drill. Their geometry and cutting edges are optimized for stable drilling in a variety of common construction substrates. The set format of ten identical 6 mm bits ensures quick replacement on site and minimizes downtime. Materials and surface treatment provide balanced wear resistance for typical renovation and installation tasks.

Suitable for

• Drilling 6 mm holes in masonry and concrete
• Routine installation of anchors and dowels
• General renovation and construction tasks
• Work with hammer drills and rotary drills on building sites

Key specifications

• Diameter: 6 mm
• Quantity in set: 10 pieces
• Tip and flute geometry: optimized for MultiConstruction drilling
• Shank type: cylindrical shank for standard chucks
• Typical applications: masonry, concrete and common construction substrates

How to use

Mark the drilling position and select the appropriate drill with a compatible chuck. Secure the workpiece if possible and set the drill to rotary or hammer mode according to substrate hardness. Start drilling at low speed to establish the center, then increase speed and apply steady pressure until the required depth is reached. Withdraw the drill occasionally to clear dust from the hole and replace bits from the set when the cutting performance decreases. Follow the drill and anchor manufacturer instructions for correct hole depth and cleaning.

Usage recommendations

Use the Bosch Expert CYL-9 MultiConstruction 6 mm bits in appropriate drill modes and wear eye protection and gloves. For prolonged drilling in hard masonry, allow periodic cooling and clear dust to maintain bit life. Replace worn bits to maintain hole accuracy and reduce stress on the drill.