Drill Bit Bosch 2609255072 5mm 86mm

The Bosch 2609255072 5mm x 86mm drill bit is a single, precision-engineered cutting tool intended for standard drilling tasks. With a 5 mm diameter and an overall length of 86 mm, this drill bit is designed to deliver accurate holes with consistent performance. The bit’s geometry and material composition provide a balance between strength and wear resistance for routine use in workshop and on-site environments.

Advantages

This drill bit offers precise hole sizing and stable drilling thanks to its consistent 5 mm diameter and properly ground tip. Its 86 mm length provides extra reach for deeper or recessed drilling applications while retaining good control. The construction is optimized for durability during repeated use and for maintaining cutting performance over time, which reduces the frequency of replacements in regular maintenance and repair tasks.

Suitable for

• General-purpose drilling in wood
• Drilling in plastics and composite materials
• Light to medium drilling tasks in metal (depending on material hardness)
• Workshop repairs, assembly and installation tasks
• Handheld and drill-press use where a 5 mm hole is required

Key specifications

• Diameter: 5 mm
• Overall length: 86 mm
• Type: single twist drill bit
• Intended use: precision drilling for general materials (wood, plastic, light metal)
• Shank: straight (standard)

How to use

Secure the drill bit in the chuck of a compatible handheld drill or drill press, ensuring it is tightened and centered. Select an appropriate speed for the material being drilled—lower speeds for metal, higher speeds for wood and plastics. Use steady pressure and allow the bit to cut without excessive force. For metal work, apply cutting fluid or coolant as needed to reduce heat and improve tool life. After drilling, clear chips from the hole and inspect the bit for wear before subsequent use.

Usage recommendations

Use appropriate personal protective equipment (safety glasses and gloves) and clamp workpieces to prevent movement. Match drill speed and feed to the material, and replace the bit when signs of wear or rounding of the cutting edges appear to maintain hole accuracy.