Drill Bit Bosch 2609255100 6 mm Diameter 93 mm Length

The Bosch 2609255100 6 mm Diameter 93 mm Length drill bit is designed for precision drilling tasks where a consistent 6 mm hole and a 93 mm working length are required. Manufactured to Bosch standards, this drill bit offers a straight shank profile and a geometry suited to accurate entry and stable drilling performance across common materials. The 93 mm length provides reach for deeper holes while maintaining rigidity for controlled operation.

Advantages

This 6 mm drill bit provides stable drilling with consistent hole diameter and a length that balances reach and stiffness. The cutting geometry reduces walking at the start of the hole and facilitates efficient chip evacuation. The material and finish contribute to wear resistance and longer service life under normal use conditions. Compatibility with standard chucks and drill holders makes it easy to fit into both corded and cordless drills.

Suitable for

• Drilling 6 mm diameter holes in wood and soft metals
• Creating through-holes and blind holes up to 93 mm depth
• General-purpose workshop and site drilling tasks
• Retrofit and maintenance work requiring consistent 6 mm holes

Key specifications

• Diameter: 6 mm
• Overall/working length: 93 mm
• Shank type: straight shank for standard chucks
• Intended use: precision drilling for general-purpose materials
• Finish: wear-resistant surface treatment

How to use

Secure the drill bit in a compatible drill chuck, ensuring the shank is seated firmly and the bit is centered. Select an appropriate drill speed for the material—lower speeds for metals and higher speeds for softwood. Apply steady, even pressure and allow the bit to cut without forcing; withdraw periodically on deeper holes to clear chips and reduce heat build-up. Use cutting fluid when drilling metals to extend tool life and improve finish quality where applicable.

Usage recommendations

For best results, match the drill speed and feed rate to the material being drilled. Use appropriate personal protective equipment such as safety glasses and gloves. Periodic sharpening or replacement will maintain consistent hole quality; when cutting metals, use lubrication to minimise heat and wear.