Drill bit Bosch 9 mm x 116 mm, model 2 609 255 206, 1 pc

For clean and tear-free drilling, this brad point drill bit has a centring tip and a shoulder cutter that produce precise holes. Manufactured according to Bosch factory standards, the bit is intended for drilling in soft and hard wood. It is supplied as a single piece and is also available in set variants.

Advantages

The centring tip reduces walking and ensures accurate start points while the shoulder cutter produces clean, splinter-free hole edges. The bit’s length provides access for deeper holes and the single-piece option allows replacement of a worn or lost bit without purchasing a set.

Suitable for

• Drilling 9 mm holes in softwood
• Drilling 9 mm holes in hardwood
• Use as a single replacement or spare drill bit

Key specifications

• Drill diameter: 9 mm
• Total length: 116 mm
• Tip type: brad point (centring tip) with shoulder cutter
• Intended materials: softwood and hardwood
• Quantity: 1 piece

How to use

Mount the 9 mm brad point bit securely in the drill chuck. Align the centring tip with the mark on the workpiece, start drilling at low speed to establish the centre, then increase speed and apply steady pressure until the required depth is reached. Withdraw the bit while the drill is running to clear chips and avoid tearing the exit side.

Usage recommendations

Use appropriate drilling speed for the wood species being worked: lower speeds for hardwoods and higher speeds for softwoods. Keep the bit clean of resin and pitch; sharpen or replace the bit when cutting edges become dull to maintain clean hole quality.