Drill Bit Bosch 2609255285

The Bosch 2609255285 drill bit is a single, precision-engineered accessory with a diameter of 1.5 cm and an overall length of 90 mm. Manufactured for general-purpose drilling, it is suitable for use with standard corded and cordless drills. The construction focuses on stable rotation, consistent hole quality and extended service life when used according to recommended conditions.

Advantages

This Bosch drill bit combines a robust material composition and accurate machining to provide reliable cutting performance and dimensional consistency. Its medium length supports controlled drilling depth while the 1.5 cm diameter enables work on larger boreholes compared with common small-diameter bits. The single-piece design reduces the risk of wobble and assists with straightforward installation and removal from the drill chuck.

Suitable for

• Drilling larger-diameter holes in wood
• General-purpose holes in soft metals and plastics
• Repair and renovation tasks requiring precise hole sizes
• Workshop and on-site applications with standard drills

Key specifications

• Diameter: 1.5 cm
• Overall length: 90 mm
• Compatibility: standard drill chucks (corded and cordless)
• Design: single drill bit (solid construction)
• Intended use: general-purpose drilling in wood, soft metals and plastics

How to use

Select a drill with a compatible chuck and secure the Bosch drill bit firmly in the chuck. Set the drill to an appropriate speed for the material: lower speeds for harder materials, higher speeds for softer materials like wood and plastics. Position the bit at the marked drilling point, apply steady axial pressure and keep the drill perpendicular to the work surface. Retract periodically in deep holes to clear chips and reduce heat build-up. After finishing, clean the bit and store it dry to maintain performance.

Usage recommendations

For best results, match drill speed and feed pressure to the material being drilled, use cutting lubricant when working with metals, and wear appropriate eye and hand protection. Inspect the bit before use for damage or dulling and replace it if performance degrades to avoid poor hole quality or increased load on the drill.