Sandpaper sheets Bosch 2609256A96 pack of 10, abrasive grit K80, size 93x230 mm

Bosch 2609256A96 pack of 10 sandpaper sheets, grit K80, size 93x230 mm are universal abrasive sheets designed for medium material removal and surface preparation on wood, painted surfaces and light metal. They fit orbital and sheet sanders and are suitable for both DIY and professional sanding tasks.

Advantages

These sandpaper sheets offer consistent K80 abrasive performance across each of the 10 pieces, providing reliable cut rate for leveling, smoothing and removing old finishes. The sheets are sized to fit standard 93x230 mm sanding plates and are compatible with a wide range of orbital and sheet sander models.

Suitable for

• Sanding and preparing wooden surfaces
• Removing paint or varnish from flat panels
• Light deburring and surface blending on soft metals
• Intermediate sanding between coats of finish

When it may not be suitable

K80 grit is a medium-coarse abrasive and may be too aggressive for final finish sanding or for very soft materials where finer grit is required to avoid visible scratch marks. For heavy stock removal on thick metal or fast material removal on very rough surfaces, coarser grits would be more effective.

Key specifications

• Quantity: 10 sheets per pack
• Grit: K80 (medium-coarse)
• Sheet size: 93 x 230 mm
• Compatible tools: orbital and sheet sanders
• Colour: red

How to use

Attach a sheet to the sanding plate of an orbital or sheet sander according to the tool manufacturer’s instructions, ensuring secure fit and correct orientation. Start sanding with light pressure, move the sander evenly across the flat surface and check progress frequently. Replace the sheet when abrasive performance decreases or the paper becomes clogged.

What to consider before purchase

• Ensure the 93 x 230 mm sheet size matches your sander’s pad
• Choose K80 grit only if medium material removal is required
• Confirm compatibility with your specific orbital or sheet sander model

Usage recommendations

For best results on wood and painted surfaces, begin with consistent, even passes using moderate pressure and finish with a finer grit if a smoother surface is required. Replace sheets when clogging or reduced cutting efficiency is observed.