Motion Detector Bosch ISC-BPR2-WP12 Wired White 12m Range

The Bosch ISC-BPR2-WP12 wired motion detector provides reliable passive infrared (PIR) intrusion detection with a maximum coverage area of 12 m × 12 m (40 ft × 40 ft). The detector uses two Fresnel lenses that form a high-density 77-zone, 7-layer detection pattern and includes a selectable lookdown lens that adds three lookdown zones. The compact white enclosure (105 × 61 × 44 mm) is designed for flexible mounting and quick installation, and the pet‑friendly selectable model is optimized to detect human intruders while reducing false alarms caused by pets up to 20 kg (45 lb).

Advantages

The ISC-BPR2-WP12 delivers wall-to-wall coverage and consistent catch performance across the full 12 m range thanks to dynamic temperature compensation and precisely focused Fresnel lenses. A self-locking enclosure with an integrated bubble level and fixed mounting height minimize installation time and reduce the need for on-site adjustments. The pet‑friendly selectable option allows installers to optimize sensitivity for environments with small animals while maintaining dependable human detection.

Suitable for

• Indoor perimeter and room intrusion detection
• Residential installations where pets are present (up to 20 kg / 45 lb)
• Commercial spaces requiring wired PIR sensors
• Installations needing compact detectors with flexible mounting

Key specifications

• Model: Bosch ISC-BPR2-WP12 (MPN: 6982308, EAN: 4060039104106)
• Coverage: up to 12 m × 12 m (40 ft × 40 ft)
• Optics: dual Fresnel lenses, 77-zone, 7-layer pattern plus selectable lookdown (3 zones)
• Pet‑friendly selectable option: optimised for pets up to 20 kg (45 lb)
• Power consumption: 100 mA
• Frequency range: 150–2000 MHz (device specification reference)
• Dimensions: 105 × 61 × 44 mm
• Color: White
• Connection: Wired

How to use

Mount the ISC-BPR2-WP12 at the recommended height for wall-mounted PIR detectors and use the integrated bubble level to ensure correct alignment. Select the pet‑friendly mode when installing in environments with animals up to 20 kg to reduce false alarms. Connect the detector to the building’s wired alarm system following Bosch wiring and power specifications, and verify coverage by walking test patterns across the protected area to confirm consistent detection throughout the 12 m × 12 m field.

Usage recommendations

Install the detector on stable walls, avoid mounting near large heat sources or HVAC outlets, and perform a walk test after installation. For pet environments, enable the selectable pet mode and verify detection with typical occupant movements to ensure reliable human detection without pet-triggered alarms.