Motion Detector Wired Bosch ISC-BPR2-W12

The Bosch ISC-BPR2-W12 Motion Detector Wired Bosch ISC-BPR2-W12 is a wired passive infrared (PIR) motion detector designed for reliable indoor intrusion detection. It offers wall-to-wall coverage with an effective detection area up to 12 m × 12 m (40 ft × 40 ft) and is available in a pet-friendly selectable model to distinguish humans from pets up to 20 kg (45 lb). The detector uses dual Fresnel lenses with a high-density 77-zone, 7-layer pattern and an additional three lookdown zones for focused response to moving targets. Dynamic Temperature Compensation improves catch performance across environments while a self-locking enclosure with integrated bubble level and flexible mounting height minimize installation time and false alarms.

Advantages

The ISC-BPR2-W12 provides wide, reliable coverage with a structured optical pattern that increases detection accuracy. Dynamic Temperature Compensation maintains sensitivity in varying temperatures. The pet‑friendly selectable option reduces false alarms from animals up to 20 kg. Installation is simplified by a self-locking enclosure and integrated bubble level, and the detector’s compact dimensions (105 × 61 × 44 mm), low standby current (10 mA) and 9–15 V input voltage facilitate versatile wired installations.

Suitable for

• Indoor perimeter and room monitoring in homes and small commercial premises
• Areas where pet immunity (up to 20 kg / 45 lb) is required
• Installations requiring compact wired PIR detectors with low power draw

Key specifications

• Model: Bosch ISC-BPR2-W12 (Wired)
• Coverage: up to 12 m × 12 m (40 ft × 40 ft)
• Optics: Dual Fresnel lenses, 77-zone 7-layer pattern plus 3 lookdown zones
• Pet option: Selectable pet‑friendly model (up to 20 kg / 45 lb)
• Power: Input voltage 9–15 V; standby current 10 mA; power consumption 2.5 W
• Dimensions: 105 × 61 × 44 mm
• Frequency range: 150–2000 MHz (for system compatibility reference)

How to use

Mount the detector at the manufacturer‑recommended height using the integrated bubble level to ensure correct alignment. Select the pet‑friendly setting if the area contains animals up to 20 kg. Connect the detector to the wired alarm control panel using the specified 9–15 V supply and wiring methods compatible with your security system. After installation, walk-test the protected area to verify coverage across the 12 m × 12 m zone and adjust positioning if necessary within the flexible mounting options.

Usage recommendations

Place the detector to provide unobstructed wall‑to‑wall coverage and avoid mounting near HVAC outlets or windows with direct sun to minimize false alarms; use the selectable pet‑friendly setting where animals are present and perform periodic walk tests to confirm consistent detection.