RGB connector 10mm bousval-électrique STRIP-CON-RGB10C 4-wire for LED strip connections

Inline RGB connector for 10mm LED strips by bousval-électrique designed to join four-conductor RGB strips quickly and without soldering. The compact STRIP-CON-RGB10C-style connector provides a direct, tool-light method to repair, extend or replace short sections of RGB LED tape while maintaining reliable power and signal continuity. It accepts standard 10mm wide RGB LED strips and secures each conductor within a four-contact housing to reduce intermittent connections and simplify installation.

Advantages

The connector enables fast, solder-free connections for 10mm RGB strips, reducing installation time and the need for specialized tools. Its four-wire contact design ensures stable electrical contact for red, green, blue and common positive/negative conductors, supporting consistent color mixing and brightness. The compact housing minimizes space usage in tight installations and the inline arrangement preserves strip alignment for an even visual result.

Suitable for

• Repairing damaged sections of 10mm RGB LED strip lighting
• Extending existing RGB tapes without soldering
• Connecting short runs of RGB strip around corners or inside profiles
• Temporary or permanent installations where quick maintenance is required

Key specifications

• Compatibility: designed for 10mm wide RGB LED strips with four conductors
• Contact configuration: four electrical contacts for R, G, B and common conductor
• Connection method: inline, clamp-style non-soldered contact
• Housing: compact inline connector body suitable for confined spaces
• Mounting: push-in connection for strip ends, no adhesive or screws required

How to use

Prepare the LED strip by ensuring the end is cut cleanly along the indicated cut line and that copper pads are exposed and free of adhesive residue. Open the connector housing, align the strip so each copper pad sits over the corresponding contact (R, G, B and common), then close the housing to clamp the contacts onto the pads. Verify that the strip is fully seated and that the connector is locked. After connecting, power up the LED strip and check each color channel for correct operation; if necessary, reopen and reseat the strip to improve contact.

Usage recommendations

For reliable long-term performance, use the connector only with compatible 10mm RGB strips and avoid exceeding the rated current of the LED run. Keep the contact area clean and dry, and avoid repeated opening and closing which can wear the contacts. For outdoor or high-humidity environments, provide additional protection such as silicone sealant or an enclosed profile to prevent corrosion and moisture ingress.