Wire bqcable.com FLRY-A 0.22 mm² PVC white, single conductor

Wire bqcable.com FLRY-A 0.22 mm² PVC white, single conductor is a thin, flexible electrical wire designed for signal, low-current and internal wiring tasks. The conductor has a cross-section of 0.22 mm² and is insulated with white PVC to provide basic electrical insulation and mechanical protection. This single-conductor FLRY-A cable is intended for compact installations where space is limited and a slim, pliable conductor is required.

Advantages

The PVC-insulated conductor delivers reliable basic insulation and resistance to common environmental factors encountered in indoor applications. Its small 0.22 mm² cross-section and flexible construction allow easy routing through tight spaces and neat arrangement inside control panels, small electronic devices, and vehicle harnesses. The white insulation improves visibility for identification and colour-coded wiring while maintaining a low profile in confined assemblies.

Suitable for

• Signal wiring in control panels and instrumentation
• Low-current internal wiring of small electronic devices
• Vehicle harnesses and secondary automotive circuits
• Prototyping and wiring of compact assemblies

Key specifications

• Conductor cross-section: 0.22 mm²
• Insulation material: PVC (white)
• Conductor type: single conductor, flexible
• Intended use: signal and low-current wiring
• Typical operating environment: indoor, protected locations

How to use

Strip the insulation to the required length using an appropriate wire stripper, taking care not to nick the conductor. Route the wire through panels, cable ducts, or harness sleeves as needed and secure with cable ties or clamps to prevent mechanical strain on terminations. Terminate the conductor with suitable crimp terminals, solder joints, or screw connections that match the application requirements and the terminal's clamping capacity. Observe standard wiring practices and ensure connections are tight and insulated where necessary.

Usage recommendations

Use this FLRY-A 0.22 mm² wire for low-current and signal applications only; do not use it for primary power circuits or where higher current capacity is required. Avoid prolonged exposure to solvents, oils, or excessive heat above PVC ratings, and route the wire away from sharp edges and high-vibration sources when possible. For outdoor, high-temperature, or oil-immersed installations choose a wire with appropriate insulation properties.