Shut-off valve BRADAS DSRA10V3232 for drip irrigation, compatible with 32 mm hose

BRADAS DSRA10V3232 shut-off valve for drip irrigation and PE piping is an inline ball valve designed to connect directly between two 32 mm polyethylene (PE) pipe ends. The compact valve body and quarter-turn ball enable reliable isolation and simple flow control for garden beds, greenhouses and localized irrigation lines. The construction is suitable for potable and non-potable water applications where a small, serviceable valve is required in low-pressure distribution and irrigation systems.

Advantages

The valve provides a tight shut-off with a simple 90-degree turn of the handle, reducing operation time and simplifying routine use. It matches standard 32 mm PE pipe dimensions for direct integration without additional adapters. The compact form factor is appropriate for confined spaces, and the serviceable ball and seals support long-term functionality when installed and maintained according to recommendations.

Suitable for

• Irrigation systems for gardens and small agricultural plots
• Garden plumbing and outdoor water supply lines
• General low-pressure water distribution in residential settings
• Temporary connections and repair sections in PE piping

Key specifications

• Pipe connection size: 32 mm × 32 mm for polyethylene (PE) pipes
• Valve type: inline ball valve with quarter-turn handle
• Function: shut-off and flow control
• Suitable media: water (potable and non-potable, subject to local installation standards)
• Installation position: inline, suitable for horizontal or vertical runs with handle access

How to use

Prepare two 32 mm PE pipe ends according to the chosen jointing method for the piping system (mechanical compression, electrofusion or compatible connection). Fit the valve inline between the pipe ends, ensuring proper alignment and secure jointing per the pipe manufacturer's instructions. Operate the valve by turning the handle 90°: align the handle with the pipe for open flow and turn perpendicular for closed. After initial pressurization, inspect seals and connections for leaks and carry out periodic checks during service life.

Usage recommendations

Use the valve within the pressure and temperature limits of the PE piping system. Avoid excessive torque on the handle and minimize prolonged exposure to direct sunlight for above-ground installations to reduce material aging. Flush the pipeline before installation to remove debris that could impair the ball or seals. For drinking water applications, verify local regulatory compatibility and use approved installation methods.