Self-adhesive die-cut printer labels Brady M6-20-435, silver, 2.54×5.08 cm, 100 labels/roll

Brady M6-20-435 are silver self-adhesive die-cut printer labels for thermal transfer printing. Each rectangular label measures 2.54 × 5.08 cm and comes on a roll of 100 labels. Constructed from metallized polyester (Glossy Metallised Permanent Polyester, B-435) with a permanent acrylic adhesive, these compact metal-look labels are designed for durable identification and asset tagging on textured metals, powder-coated surfaces and low surface energy plastics. The material is UL approved and CSA accepted, rated for service temperatures from -40 to 194 °F (-40 to 90 °C), and resistant to solvents, abrasion and weathering. The product is made in Mexico and intended for use with compatible Brady thermal transfer printers and ribbons.

Advantages

The metallized polyester provides a metallic finish that maintains print quality and legibility while resisting wear in industrial conditions. The permanent acrylic adhesive offers high bond strength to difficult surfaces and sustained performance across a wide temperature range. Thermal transfer printability ensures sharp, long-lasting text and barcodes when used with recommended Brady ribbons. UL approval and CSA acceptance support use in regulated environments where recognized material safety and performance are required.

Suitable for

• Equipment and machinery identification in industrial facilities
• Asset tagging of tools, instruments and electronic components
• Outdoor or indoor labels on metal panels, cabinets and enclosures
• Identification on powder-coated and textured metal surfaces
• Labels on low surface energy plastics where standard adhesives may fail

Key specifications

• Label size: 2.54 × 5.08 cm (width × height)
• Quantity: 100 labels per roll; 1 roll per pack
• Material: Glossy metallized polyester (B-435)
• Color/finish: Silver, metallic look
• Adhesive: Permanent acrylic, high adhesion to textured metals and low surface energy plastics
• Printing method: Thermal transfer (ribbon required)
• Service temperature range: -40 to 194 °F (-40 to 90 °C)
• Durability: Weatherproof, heat-resistant, abrasion-resistant
• Compatibility: Designed for use with Brady M610 / BMP61 / BradyPrinter M611 / M611 printers (use M61-R6010 ribbon) and M710 / BMP71 printers (use M7-R6000 ribbon)

How to use

Install the roll into a compatible Brady thermal transfer label printer following the printer manufacturer’s loading instructions. Fit the appropriate thermal transfer ribbon specified for your printer model before printing. Configure label dimensions in the printer driver or labelling software to 2.54 × 5.08 cm and set print settings for thermal transfer on metallized polyester to achieve optimal contrast. After printing, allow ink to set briefly if required, then apply the label to a clean, dry surface. For best adhesion, clean the application area of dust, oil and loose particles and press the label firmly from one edge to the other to ensure full contact.

Usage recommendations

Use the recommended Brady ribbons for this material to ensure print durability and adhesion. For application to powder-coated or textured metals and low surface energy plastics, verify surface cleanliness and test a sample label in the intended environment. Avoid use on freshly painted surfaces until paint has fully cured. Store rolls in a cool, dry place away from direct sunlight to preserve adhesive performance.