LED power supply BREVE ZLDP 100-24YCL 24V DC 100W 4.16A IP65 with protections

BREVE ZLDP 100-24YCL is an AC-to-DC LED power supply delivering 24V DC at up to 100W (4.16A) in an IP65-rated enclosure. Engineered for use with LED strips, modules and signage, this sealed unit provides a stable constant-voltage output and is suitable for installations that require protection against dust and water. Built-in safety features protect connected lighting from short-circuit, overload and overvoltage conditions to support reliable operation in both indoor and outdoor environments.

Advantages

The IP65 housing offers protection against dust ingress and low-pressure water jets, making the unit appropriate for sheltered outdoor and damp indoor locations. With a 24V DC constant-voltage output and a 100W power rating, the power supply supports a wide range of LED lighting configurations. Integrated protections for short-circuit, overload and overvoltage improve system safety and reduce the need for additional external protective devices. The compact, sealed design simplifies installation in enclosures or near lighting fixtures where moisture resistance is required.

Suitable for

• LED tape and strip lighting installations requiring 24V DC power
• LED modules and pixel signage in shopfronts and displays
• Outdoor covered fixtures, canopies and under-eave lighting where IP65 is sufficient
• Indoor damp locations such as kitchens, bathrooms or utility rooms

Key specifications

• Output voltage: 24V DC
• Maximum output power: 100W (4.16A)
• Input: AC mains (universal input range typical for this class; check local mains compatibility before installation)
• Enclosure rating: IP65 (dust tight and protected against low-pressure water jets)
• Protections: short-circuit, overload, overvoltage
• Form factor: sealed, compact housing suitable for mounting near fixtures

How to use

Mount the power supply in a location that maintains its IP65 integrity and allows sufficient ventilation for heat dissipation. Connect the AC mains to the input terminals in accordance with local electrical codes, ensuring correct phase and earth connections. Attach the LED load to the 24V DC output, observing polarity and the maximum current rating (4.16A). Power up and verify that the connected LED lighting operates within expected brightness and that no fault indicators or excessive heating occur. If the unit enters a protection mode due to overload or short-circuit, disconnect power and correct the fault before restarting.

Usage recommendations

For reliable long-term performance, install the power supply in a sheltered position away from direct water spray and ambient temperatures outside the manufacturer’s specified range. Use appropriate cable sizes, secure terminal connections, and include an accessible means of isolation or circuit protection as required by local regulations.