Dreame vacuums for fast and efficient cleaning!
In cart {{totalProductsCount}} item(s)
Your cart is empty
Filament ASA black 1.75 mm 1 kg refill pack — BrightSign
BrightSign ASA black filament, 1.75 mm diameter in a 1 kg refill pack, is a weather-resistant engineering material designed for FDM/FFF 3D printing. ASA (Acrylonitrile Styrene Acrylate) combines good mechanical strength with UV and moisture resistance, making it suitable for outdoor parts, housings and functional prototypes that require dimensional stability and long-term exposure resistance.
ASA offers superior UV stability compared with standard ABS, reducing colour fading and loss of mechanical properties when parts are exposed to sunlight. The material provides good impact resistance and dimensional stability across a wide temperature range. This refill pack format lets users replenish supply efficiently while keeping spool waste to a minimum.
Load the 1.75 mm ASA filament into a compatible FDM/FFF printer following the manufacturer's filament feeder instructions. Set nozzle temperature typically between 240–260°C and heated bed temperature between 90–110°C; adjust settings based on your specific printer and part geometry. Enable an enclosed build chamber or print with environmental shielding when possible to reduce warping. Use moderate print speeds and appropriate retraction settings to minimise stringing. Allow printed parts to cool slowly on the build plate before removal to preserve dimensional accuracy.
For best outdoor performance, use ASA for parts that require long-term UV and humidity exposure resistance. Store unused filament in a dry, sealed container or desiccant bag to prevent moisture uptake, and dry filament before printing if it has absorbed moisture.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}