BRUNOX Epoxy spray 150 ml — corrosion protection and repair coating

BRUNOX Epoxy spray 150 ml is an epoxy-based aerosol formulated to provide a hard, protective coating for metal surfaces. Supplied in a compact 150 ml spray can, the product is intended for targeted corrosion protection, spot repairs and sealing of small rusted areas, joints and fittings where a durable, chemical-resistant layer is required. The epoxy formulation cures to form a resilient film that adheres to prepared metal and reduces further corrosion progression.

Advantages

The aerosol delivers a uniform epoxy layer without the need for mixing or specialized equipment. It offers good adhesion to cleaned metal, rapid handling strength after application, and resistance to moisture and many common environmental influences. The small can size allows convenient application in confined spaces and for on-the-spot repairs where brush-applied coatings are impractical.

Suitable for

• Spot treatment of small rusted areas on machinery and equipment
• Sealing and protecting joints, fittings and welded seams
• Repair coating for metal housings, brackets and small components
• Preventive coating for exposed metal parts in indoor and covered outdoor environments

Key specifications

• Form: epoxy-based aerosol
• Volume: 150 ml per can
• Film type: cured hard epoxy protective film
• Substrate compatibility: steel and ferrous metals when properly prepared
• Resistance: moisture and common environmental exposure when cured

How to use

Shake the can well before use. Prepare the metal surface by removing loose rust, grease and contaminants; light abrasive cleaning or wire brushing is recommended for optimal adhesion. Hold the can at the recommended distance (typically 20–30 cm) and apply thin, even passes to build the film gradually. Allow appropriate drying or curing time between coats as indicated on the product label before handling or exposure to moisture. Ensure adequate ventilation during application and curing.

Usage recommendations

Use on clean, dry surfaces for best results. For severely corroded areas, remove heavy rust and apply a primer or multiple thin coats to achieve the required film thickness. Store the aerosol upright in a cool, dry place away from direct heat sources.