3D printer filament c-tech PREMIUM LINE ABS Luminous Green RAL6038 1.75 mm 1 kg

c-tech PREMIUM LINE ABS filament in Luminous Green (RAL6038) is a 1.75 mm, 1 kg spool formulated for fused filament fabrication (FFF/FDM) 3D printers. Manufactured from ABS polymer, the filament delivers a balance of mechanical strength and thermal resistance suitable for functional prototypes, enclosures and mechanical parts. The vivid Luminous Green color improves part visibility during assembly and inspection and accepts common post-processing methods such as sanding, smoothing and painting.

Advantages

The filament provides reliable extrusion behavior on standard FDM printers compatible with ABS, producing consistent layer adhesion and dimensional stability for medium-detail parts. Its thermal properties support use in moderately warm environments and enable secondary operations like drilling and tapping. The Luminous Green shade offers high contrast for visual checks and simplifies identification of printed components.

Suitable for

• Functional prototypes and proof-of-concept parts
• Enclosures, housings and mounting brackets
• Mechanical components that require moderate strength and heat resistance
• Visual aids, fixtures and assembly tools where high visibility is needed
• Post-processing workflows including sanding, priming and painting

Key specifications

• Material: ABS (acrylonitrile butadiene styrene)
• Color: Luminous Green (RAL6038)
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg net filament
• Recommended nozzle size: 0.4 mm (typical)
• Typical print temperature range: 230–260 °C (dependent on printer and setup)
• Recommended heated bed temperature: 80–110 °C
• Good machinability: suitable for sanding, drilling and painting

How to use

Load the 1.75 mm filament into an FDM printer that supports ABS and set extrusion parameters according to the printer manufacturer’s guidance. Begin with a nozzle temperature around 230–250 °C and a heated bed temperature near 90–100 °C, then adjust to optimize layer adhesion and surface finish for your specific machine. Use an enclosed build chamber or reduce draft to minimize warping and ensure dimensional accuracy. Calibrate extrusion multiplier and retraction settings to reduce stringing and surface defects.

Usage recommendations

For best results, print on a prepared build surface such as PEI, ABS slurry or a heated glass bed with an adhesive aid. Allow parts to cool gradually in a draft-free environment and perform post-processing like light sanding followed by primer before final painting. Store filament in a dry container with desiccant to maintain printability and avoid moisture-related issues.