c-tech ABS 3D printer filament 1.75 mm, 1 kg spool

c-tech ABS 3D printer filament 1.75 mm, 1 kg spool is a thermoplastic filament formulated for FDM/FFF 3D printers. Offered in a 1.75 mm diameter and wound on a 1 kg spool, this ABS filament is intended for printing mechanically robust parts that require improved impact resistance and higher temperature stability compared with common PLA materials. It is compatible with printers designed for 1.75 mm ABS and is intended for use with the appropriate extrusion temperature and a heated build platform to reduce warping and ensure dimensional accuracy.

Advantages

The filament provides consistent diameter and roundness to support steady extrusion and layer adhesion. Its material composition gives good mechanical strength, toughness and heat resistance suitable for functional prototypes and end-use components. The spool format simplifies handling and mounting in standard filament holders, while the 1 kg weight offers a practical balance between material availability and storage.

Suitable for

• Functional prototypes and mechanical parts requiring strength and impact resistance
• Enclosures, housings and fixtures exposed to moderate temperatures
• Replacement parts, brackets and structural components for testing and small-series production

Key specifications

• Material: ABS (acrylonitrile butadiene styrene)
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg
• Recommended extrusion temperature: use ABS-appropriate temperatures (see printer and material guidelines)
• Build surface: heated bed recommended to reduce warping
• Compatibility: FDM/FFF printers designed for 1.75 mm ABS filament

How to use

Load the filament onto the printer spool holder and feed it into the extruder according to your printer manufacturer's instructions. Set the nozzle temperature to an ABS-appropriate range and enable a heated bed; consult your printer documentation for specific temperature settings. Allow the first layer to adhere fully before proceeding with the print, and use appropriate print speeds and cooling settings to balance layer bonding and dimensional stability. Store unused filament in a dry environment to prevent moisture uptake that can affect print quality.

Usage recommendations

For best results, print on a heated bed with suitable adhesion aids (such as ABS slurry, PEI sheet, or glue stick) and use an enclosure where possible to maintain ambient temperature. Dry filament before use if it has absorbed moisture; typical drying conditions depend on the filament dryer or oven used and manufacturer guidance. Adjust first-layer height and extrusion multiplier to account for printer-specific tolerances.