Filament c-tech PETG 1.75 mm Yellow RAL1016 1 kg

c-tech PETG 1.75 mm Yellow RAL1016 is a 1 kg spool of PETG 3D printing filament designed for standard FDM/FFF printers that accept 1.75 mm filament. PETG combines the mechanical strength of ABS with the ease of printing of PLA, providing reliable layer adhesion, moderate flexibility and enhanced chemical resistance. The yellow RAL1016 colour offers a consistent, high-visibility finish suitable for functional parts, prototypes and durable prints.

Advantages

The filament delivers consistent diameter and roundness for stable extrusion and fewer print failures. PETG's balanced properties result in good impact resistance and toughness while maintaining dimensional stability. Its chemical resistance makes it suitable for parts exposed to mild solvents or cleaning agents. The material prints at temperatures typical for PETG and adheres well to common build surfaces when appropriate bed preparation is used.

Suitable for

• Functional prototypes and mechanical parts
• Enclosures, brackets and mounting components
• Visible parts requiring a bright yellow finish
• Objects that need impact resistance and moderate flexibility

Key specifications

• Material: PETG (polyethylene terephthalate glycol-modified)
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg
• Colour: Yellow (RAL1016)
• Typical printing temperature range: standard PETG range (refer to printer and filament settings)
• Compatibility: standard FDM/FFF 3D printers accepting 1.75 mm filament

How to use

Load the filament into a compatible 1.75 mm extruder following your printer manufacturer's instructions. Set nozzle and bed temperatures according to PETG recommendations and the printer profile you use; adjust print speed and retraction settings to reduce stringing. Ensure proper bed adhesion by using an appropriate build surface or adhesive aid, and calibrate nozzle height before printing. Store the filament in a dry place or sealed bag with desiccant to maintain print quality.

Usage recommendations

For best results, print with a heated bed and moderate enclosure ventilation to maintain consistent cooling. Use conservative first-layer settings to ensure adhesion. If stringing occurs, reduce print temperature slightly or fine-tune retraction parameters. Keep the spool dry to avoid moisture-related issues such as bubbling or poor extrusion.