Filament c-tech PETG 1.75 mm 1 kg Pearl Gold (RAL 1036)

c-tech PETG 1.75 mm filament in Pearl Gold (RAL 1036) is a 1 kg spool designed for FDM/FFF 3D printers that accept 1.75 mm filament. PETG offers a balance of mechanical strength, chemical resistance and ease of printing with reduced warping. The Pearl Gold color provides a metallic, pearlescent finish suitable for visible functional parts, prototypes and decorative objects.

Advantages

The filament combines PETG properties — good layer adhesion, impact resistance and low shrinkage — with a metallic pearl appearance. It is packaged as a 1,000 gram spool and is compatible with printers that use 1.75 mm filament. The material prints reliably at typical PETG settings and produces durable parts with an attractive surface finish.

Suitable for

• Functional mechanical parts and housings
• Prototype models and concept parts
• Decorative items and visual components with a metallic look
• Small production runs requiring chemical resistance and durability

Key specifications

• Brand: c-tech
• Material: PETG
• Diameter: 1.75 mm
• Spool weight: 1,000 g (1 kg)
• Color: Pearl Gold (RAL 1036)
• MPN: 3DF-P-PETG1.75-1036
• EAN: 8594125012953

How to use

Load the 1.75 mm filament onto a compatible FDM/FFF printer. Use standard PETG printing settings: nozzle temperature typically between 230–250°C and bed temperature around 70–80°C, adjust according to your printer and filament behavior. Use moderate print speeds and enable good cooling where appropriate to balance surface finish and layer adhesion. Store the spool in a dry place or sealed bag with desiccant when not in use to prevent moisture absorption.

Usage recommendations

For best results, calibrate extrusion and retraction settings for your printer before printing final parts. Test print small samples to fine-tune temperature and speed; avoid excessive cooling to maintain layer bonding and reduce stringing by adjusting retraction.