Speaker cable Cabletech 2x1.00 mm² - twin conductor audio cable

Cabletech speaker cable 2x1.00 mm² is a twin conductor audio cable intended for connecting loudspeakers to amplifiers, receivers or audio processors in home audio systems. Each conductor has a cross-sectional area of 1.00 mm², offering a balance between flexibility and adequate current carrying capacity for short to medium cable runs. The cable is suitable for stereo pairs, surround sound setups and fixed installations where a modest conductor size is appropriate.

Advantages

The twin conductor design ensures clear left-right signal separation and straightforward polarity identification during installation. Conductors with 1.00 mm² cross-section deliver low resistance for short to medium distances, reducing power loss and preserving audio detail. The cable's construction allows easy stripping and termination with banana plugs, spade connectors or bare-wire connections, supporting a range of connector types commonly used in home audio.

Suitable for

• Stereo bookshelf speaker connections in living rooms and studios
• Home theatre surround sound speaker wiring
• In-wall or surface-mounted speaker runs for medium distances
• Connecting small to medium-sized passive loudspeakers to amplifiers and receivers

Key specifications

• Twin conductor (2-core) audio cable
• Conductor cross-section: 1.00 mm² per core
• Designed for low-resistance audio signal transmission over short to medium runs
• Flexible jacket suitable for indoor installation and routing
• Compatible with banana plugs, spade connectors and bare-wire terminations

How to use

Select appropriate cable length to minimize excess and avoid unnecessary signal loss. Strip the outer jacket and insulation from each conductor to reveal the bare wire, taking care not to nick the conductors. Maintain correct polarity by connecting the same conductor to positive terminals on both amplifier and speaker; many installations use colour or marked conductor for identification. Terminate the conductors with banana plugs, spade lugs, or insert as bare wire into spring-clip or binding post terminals and tighten securely to ensure a reliable electrical and mechanical connection.

Usage recommendations

The 2x1.00 mm² cross-section is best for short to medium speaker runs and small to medium power levels; for long runs or high-power systems consider larger conductor cross-sections to reduce voltage drop and maintain audio performance.