Ceresit grout CE60/07 2 kg grey – tile joint grout, brand CERESIT, model CE60/07

Ceresit grout CE60/07 2 kg grey is a ready-to-use tile joint grout from CERESIT designed for filling and sealing joints between ceramic, porcelain and natural stone tiles. Supplied in a 2 kg package, the grey colour provides even, neutral seams that suit a wide range of interior designs and many compatible exterior applications. The formulation is intended for use on typical joint widths in renovation and new installation projects, offering uniform coverage and a smooth finish when applied correctly.

Advantages

The grout is supplied ready-to-use, eliminating the need to mix powders on site and reducing preparation time. Its grey shade creates consistent, unobtrusive joints that blend with many tile surfaces while concealing minor variations in tile edges. The product is formulated to adhere to ceramic, porcelain and natural stone, providing stable seams that resist crumbling when applied and cured under recommended conditions.

Suitable for

• Grouting joints between ceramic wall and floor tiles
• Grouting porcelain tiles in kitchens and bathrooms
• Sealing joints around natural stone tiles indoors
• Small renovation works and new tile installations with typical joint widths

When it may not be suitable

This ready-to-use grout is formulated for common indoor tile applications and some compatible outdoor uses; it may not be suitable for heavy-duty exterior floors subject to constant water immersion, extreme mechanical stress, or movement joints that require flexible sealants. For very wide joints, specialized grouts or joint fillers designed for larger gaps should be considered. Always check compatibility with sensitive natural stones that require specific sealants or grout formulations.

Key specifications

• Form: ready-to-use paste
• Colour: grey
• Package weight: 2 kg
• Intended substrates: ceramic, porcelain, natural stone (compatible types)
• Application area: indoor and compatible outdoor surfaces
• Typical use: tile joint filling and sealing for standard joint widths

How to use

Ensure tile surfaces and joints are clean, dry and free from dust, adhesive residues or loose particles before application. Open the container and apply the ready-to-use grout into joints using a rubber float or grout trowel, pressing the material firmly to completely fill the gap. Remove excess grout from tile faces with a damp sponge or cloth before the grout begins to set, rinsing the sponge frequently. Allow the grout to cure according to ambient temperature and humidity; avoid heavy traffic and water exposure until the product has fully set.

What to consider before purchase

• Confirm that the grey colour suits your tile shade and overall design
• Verify joint width and choose a grout suitable for that gap size
• Check that the substrate (natural stone type) is compatible with cementitious grouts
• Estimate required quantity based on tile size and joint width to decide number of 2 kg packs

Usage recommendations

For best results, use at moderate room temperature and stable humidity. Test on a small inconspicuous area or sample tile to check colour match and compatibility with the tile surface. Clean tools and hands promptly after use; cured grout is harder to remove. For exterior or wet-area installations exposed to continuous water, consult product technical guidance or consider a grout with proven water-resistance or flexible properties.