Drill Hole Saw Cimco 207325

The Cimco 207325 drill hole saw is a single-piece, hardened cutting tool designed for creating circular holes in masonry materials. With an 8.2 cm cutting diameter, this hole saw is built to penetrate brick, concrete, lightweight concrete and natural stone. The tool’s construction focuses on durability and consistent cutting performance for both professional tradespeople and DIY users handling installation, routing, or repair tasks that require precise round openings.

Advantages

This hole saw delivers stable cutting thanks to its robust single-piece design and hardened cutting edge. The 8.2 cm diameter offers a useful size for common service penetrations while the geometry and material selection reduce wear when used on abrasive masonry surfaces. Designed for straightforward attachment to compatible arbors or drills, it provides reliable life span and predictable hole quality under typical working conditions.

Suitable for

• Drilling holes in brick for pipe, conduit or cable entries
• Creating openings in concrete or lightweight concrete for installations
• Cutting circular holes in natural stone for fixtures or anchors
• Renovation and repair work where precise round cutouts are required

Key specifications

• Cutting diameter: 8.2 cm
• Material suitability: brick, concrete, lightweight concrete, stone
• Construction: single-piece hole saw
• Intended use: masonry drilling

How to use

Select a drill and arbor compatible with a single-piece masonry hole saw of the specified diameter. Mark the center point of the required hole on the work surface. Secure the workpiece or ensure the drilling location is stable. Start drilling at low speed to establish a guide and then increase speed and apply steady, even pressure. Use periodic withdrawal of the hole saw to clear dust and reduce heat buildup. For thicker or denser materials, reduce feed rate and allow the tool to cool between passes. Follow the drill manufacturer’s instructions for safe operation and appropriate accessories.

Usage recommendations

For best results, use a hammer drill or rotary drill with adequate power and a compatible arbor. Wear appropriate personal protective equipment including eye protection, dust mask and gloves. Keep the cutting area clear of debris and use water or intermittent breaks to manage dust and heat when working with dense concrete or stone.