Drill Bit Cimco 20 8332 1 cm Diameter 210 mm Length

The Cimco 20 8332 PROFI SDS-Plus hammer drill is a 10 mm (1 cm) diameter, 210 mm length solid drill bit made in Germany for SDS-Plus rotary hammers. It features carbide cutting edges and a wide Twinmax helix for high drilling speed while the tool's vibration-optimised drilling behaviour improves handling. The bit is certified by the German Masonry Drill Bit Testing Association (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) and is suitable for all machines with SDS-Plus holders.

Advantages

Carbide (hard metal) cutting edges provide increased wear resistance and durability. The wide Twinmax helix accelerates chip removal and supports higher drilling speed. Vibration-optimised design reduces operator vibration exposure and improves drilling stability. Certification by PGM according to DIBt requirements confirms suitability for masonry applications. Compatibility with SDS-Plus holders ensures wide machine compatibility.

Suitable for

• Drilling in masonry, concrete, and brick
• Use with SDS-Plus rotary hammers
• Professional construction and DIY renovation tasks

Key specifications

• Brand: Cimco
• Model / MPN: 208332
• EAN: 4021104083320
• Type: PROFI SDS-Plus hammer drill, solid one-piece bit
• Diameter: 10 mm (1 cm)
• Length: 210 mm
• Cutting material: hard metal (carbide) blades
• Compatibility: for machines with SDS-Plus holders
• Country of manufacture: Germany
• Certification: PGM tested according to DIBt requirements

How to use

Secure the Cimco SDS-Plus bit in the rotary hammer's SDS-Plus chuck until it locks. Select the hammer or rotary hammer mode appropriate for masonry drilling. Start drilling at low speed to position the hole, then apply steady pressure and operate at recommended speed for your machine and material. Withdraw the bit periodically to remove debris and allow cooling when drilling deep holes. After use, clean the bit and store it dry to prevent corrosion.

Usage recommendations

Use appropriate personal protective equipment (safety glasses, hearing protection, dust mask and gloves). Match drill speed and feed pressure to the material being drilled. Replace the bit if cutting performance decreases or if visible damage to the carbide tip appears.