Hole Saw c.k tools 424034 105 mm — circular cutting cup for wood and soft materials

The Hole Saw c.k tools 424034 105 mm is a circular cutting cup designed for cutting clean, consistent round openings in wood and other soft materials. With a nominal cutting diameter of 105 mm, this cup saw is compatible with standard arbors and drill drivers for straightforward attachment and rapid use on site. It is suitable for making apertures for pipes, cables, ventilation ducts and other installation tasks where a precise circular hole is required.

Advantages

The 105 mm cutting diameter provides a commonly used size for many installation needs while the cup design enables efficient material removal and reduced binding during cutting. Compatibility with standard arbors and drill drivers simplifies setup and allows quick interchange with other hole saws. The product is intended specifically for wood and other soft materials, delivering straight, consistent holes when used with appropriate speed and feed.

Suitable for

• Creating openings for plumbing pipes and conduits
• Installing ventilation ducts and cable pass-throughs
• Cutting holes in timber, plywood, chipboard and similar soft substrates
• General carpentry and installation work requiring a 105 mm circular hole

Key specifications

• Cutting diameter: 105 mm
• Intended materials: wood and other soft materials
• Design: cup-style hole saw for efficient material removal
• Compatibility: fits standard arbors and drill drivers

How to use

Secure the hole saw to a compatible arbor and attach it to a drill driver rated for the work. Mark the center of the hole on the workpiece, position the pilot and start drilling at low speed to establish alignment, then increase speed as required for steady cutting. Apply consistent, moderate pressure and allow the tool to cut without forcing; periodically withdraw the cup to clear chips and prevent clogging. After cutting, smooth the edge of the hole if necessary using sandpaper or a file.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and gloves. Select drill speeds suited to the specific wood or soft material being cut and avoid excessive side-loads on the drill to maintain straight, clean holes. For prolonged cutting, clear chips frequently to preserve cutting efficiency and reduce heat build-up.