Clinex Dispersion Stripper 5L — concentrated remover for polymer floor coatings, 5 L

Clinex Dispersion Stripper 5L is a concentrated liquid formulated to remove polymer and dispersion floor coatings. Supplied in a 5-litre container, the product is designed to soften, dissolve and lift old polish and synthetic finish layers to prepare surfaces for cleaning or re-coating. It is suitable for professional maintenance and periodic renovation of hard floor coverings including tiles, vinyl and sealed concrete, where existing polymer layers must be stripped efficiently.

Advantages

The formula provides high stripping power with rapid action on synthetic finishes and dispersion coatings, reducing mechanical effort during removal. As a concentrated product, it allows dilution to match the degree of soiling and coating thickness, offering flexibility and cost efficiency. It is compatible with common hard floor surfaces such as ceramic tiles, vinyl and sealed concrete when used according to instructions, and it facilitates subsequent cleaning or re-coating by leaving the substrate free of residual polymer layers.

Suitable for

• Removing old polymer-based polish and dispersion finishes from tiled floors
• Stripping synthetic coatings on vinyl and linoleum surfaces
• Preparing sealed concrete floors for deep cleaning or re-coating
• Professional maintenance in commercial and institutional facilities

Key specifications

• Form: concentrated liquid
• Container volume: 5 litres
• Intended use: removal of polymer and dispersion floor coatings
• Suitable substrates: glazed ceramic tiles, vinyl, sealed concrete
• Application method: manual or machine-assisted stripping

How to use

Before use, read the product safety information and perform a small compatibility test on an inconspicuous area. Dilute the concentrate as recommended for the type and thickness of the coating to be removed. Apply an even layer to the surface and allow sufficient dwell time for the product to penetrate and soften the polymer film. Agitate with a floor pad, brush or scrubbing machine where needed, then remove dissolved residues with a wet vacuum, mop or rinse. Repeat the procedure if necessary until the substrate is free of coating. Rinse thoroughly and allow the floor to dry before applying any new finish.

Usage recommendations

Use personal protective equipment (gloves, eye protection) and ensure adequate ventilation during application. Avoid prolonged contact with skin and do not use on unsealed or sensitive surfaces without prior testing. Follow local disposal regulations for spent solution and contaminated rinse water.