Router bit CMT 271.165.24H — 24 mm diameter, 1/4" shank

CMT router bit 271.165.24H is a 24 mm diameter cutter with a 1/4" shank designed for handheld and table routers. It is intended for trimming, profiling and edge work on solid wood and wood-based panels, delivering precise cuts and uniform edge quality. The tool is suitable for applications in joinery, cabinetry and finishing where a 24 mm profile is required and where consistent cutting performance is needed.

Advantages

The carbide-tipped cutting edges provide long life and wear resistance while maintaining sharpness for repeated use. A balanced design reduces vibration during operation, improving cut quality and operator control. Compatibility with standard 1/4" collets makes the bit easy to install on most handheld and small table routers. The 24 mm diameter produces a noticeable profile while remaining manageable on typical woodworking equipment.

Suitable for

• Trimming and profiling edges of doors, panels and mouldings
• Cabinetry edge finishing and decorative profiling
• Joinery tasks requiring a consistent 24 mm profile
• Working with solid wood, MDF, plywood and laminated boards

Key specifications

• Cutting diameter: 24 mm
• Shank diameter: 1/4" (6.35 mm)
• Intended use: handheld and table routers
• Material compatibility: solid wood and wood-based panels
• Cutting material: carbide-tipped cutters

How to use

Install the router bit in a router collet that accepts a 1/4" shank and ensure it is tightened securely. Set the router speed according to material and cutter diameter; use moderate speeds for dense or laminated boards and higher speeds for softwoods. Make test cuts on scrap material to confirm profile depth and feed rate before machining final pieces. Feed the workpiece steadily against the cutter rotation, and make multiple shallow passes rather than a single deep cut to reduce load on the cutter and improve surface finish.

Usage recommendations

Use appropriate personal protective equipment (eye and hearing protection) and, where possible, dust extraction. Avoid side loads and impact on the cutting edges; maintain consistent feed speed and allow the cutter to cool between extended runs. Inspect the cutter periodically for wear or damage and replace when the cutting edges no longer deliver clean cuts.