Drill Bit Condor spiral wood hex shank 30 mm CON-DA230-30

Spiral wood drill bit Condor with a 30 mm cutting diameter and hexagonal shank is designed to drill clean, accurate holes in a wide range of wood materials. The spiral flute geometry evacuates chips efficiently, reducing clogging and heat build-up during continuous use. The hex shank provides a secure grip in compatible chucks and allows quick bit changes when used with impact drivers or keyless chucks that accept hex shanks.

Advantages

The spiral flute design improves chip removal and maintains cutting efficiency over longer runs. A 30 mm cutting diameter delivers a larger bore for applications that require substantial holes in soft and hardwoods. The hexagonal shank reduces slippage in the chuck and simplifies rapid bit swaps, which is useful on job sites and in production settings. The bit's geometry is optimized for straight entry and stable drilling, producing smoother hole walls with less tear-out.

Suitable for

• Carpentry and joinery tasks requiring clean 30 mm holes
• Drilling in softwood, hardwood and engineered wood panels
• Use with impact drivers and drills that accept hex shanks
• Furniture assembly, dowel and bolt hole preparation

Key specifications

• Cutting diameter: 30 mm
• Shank type: hexagonal shank for secure chuck engagement
• Tip and flute: spiral flute for efficient chip evacuation
• Intended material: wood and wood-based materials

How to use

Secure the drill bit in a compatible chuck or impact driver with a hex socket, ensuring the shank is fully seated. Mark the drilling point on the workpiece and, if needed, use a center punch or pilot mark to prevent walking. Start drilling at low speed to establish the entry, then increase speed while applying steady, even pressure. Withdraw the bit periodically on deep holes to clear chips and reduce heat build-up. After completion, inspect the hole for burrs and remove any splinters with sandpaper if required.

Использование и рекомендации по применению

For best results, use the bit with appropriate speed for the wood type—lower speeds for hardwoods and higher speeds for softwoods—and keep the bit sharp and clean. Wear eye protection and follow standard safety precautions when operating power tools.