Drill bit Condor spiral hex for wood 18 mm, model CON-DA460-18

Condor spiral hex shank wood drill bit CON-DA460-18, 18 mm diameter, is designed for efficient drilling in a wide range of wood materials. The spiral flute geometry promotes fast chip evacuation while the sharp cutting edges deliver clean entry and reduced tear-out. The hexagonal shank provides a secure, slip-resistant fit in chucks and impact drivers, enabling reliable torque transfer for common woodworking tasks.

Advantages

The spiral flute removes chips quickly, reducing clogging and improving drilling speed. The 18 mm cutting diameter makes this bit suitable for creating larger holes for dowels, bushings, and cable pass-throughs. Hex shank design ensures positive engagement with quick-change chucks and impact drivers, minimizing cam-out and slippage. The bit’s ground cutting edges and spiral profile help produce cleaner hole edges in soft and hardwoods.

Suitable for

• Drilling holes in softwood and hardwood
• Carpentry and timber framing tasks
• Furniture assembly and joinery
• Installing dowels, bushings, and conduit passes
• General-purpose wood drilling with corded or cordless drivers

Key specifications

• Material application: wood and wood-based materials
• Cutting diameter: 18 mm
• Flute type: spiral for chip evacuation
• Shank type: hexagonal for secure grip
• Suitable drive: standard chucks and impact/quick-change holders

How to use

Secure the hex shank of the drill bit in the drill chuck or impact driver and tighten according to the tool manufacturer’s instructions. Mark the drilling point and, if needed, clamp the workpiece to prevent movement. Begin drilling at low speed to establish the hole, then increase speed while applying steady axial pressure. Withdraw the bit periodically on deeper holes to clear chips and avoid overheating. After use, remove sawdust from the flutes to maintain cutting performance.

Usage recommendations

Use appropriate drill speeds for the wood type — lower speeds for hardwoods and higher speeds for softwoods. Apply light cutting lubricant or a spray specifically recommended for woodworking only if required for the application. Wear eye protection and dust mask when drilling, and ensure the workpiece is well secured to prevent shifting.