Wood Round-Over Router Bit Condor CON-RB-906 32 x 15.5 mm, 8 mm shank

Condor CON-RB-906 is a wood round-over router bit with a cutting diameter of 32 mm and a cutting length of 15.5 mm, designed for use in routers and CNC machines with an 8 mm shank. It is intended to produce smooth, consistent rounded edges on solid wood, plywood and engineered board materials used in furniture, cabinetry, trim and decorative moulding. The tool’s geometry provides a predictable profile and controlled chip removal for repeatable edge finishing during routing operations.

Advantages

This round-over bit delivers uniform edge radii and a clean cutting surface, reducing the need for extensive sanding after profiling. The 8 mm shank ensures stable clamping in compatible collets, contributing to lower vibration and improved surface quality. Its cutting dimensions allow efficient material removal while maintaining control for detailed edge work on a variety of panel and solid timber thicknesses.

Suitable for

• Rounding edges of solid wood boards and hardwood furniture components
• Edge profiling on plywood, MDF and other wood-based panels
• Producing decorative trim, mouldings and cabinet door edges
• Use in handheld routers and CNC routing machines with 8 mm collets

Key specifications

• Cutting diameter: 32 mm
• Cutting length/height: 15.5 mm
• Shank diameter: 8 mm
• Profile type: round-over edge
• Compatible materials: solid wood, plywood, MDF and wood-based boards

How to use

Install the bit securely in a router or CNC spindle that accepts an 8 mm shank, ensuring the collet is clean and tightened to the manufacturer’s recommended torque. Set the routing depth so the cutting length produces the desired radius on the workpiece edge, and make test passes on scrap material to confirm feed rate and depth. Use steady feed rates and avoid excessive depth-of-cut per pass; multiple shallow passes improve finish quality and reduce tool stress. Maintain proper dust extraction and use appropriate personal protective equipment while routing.

Usage recommendations

For best results, perform finishing passes at a moderate feed rate and reduce cutting depth if burning or tear-out occurs. Keep the bit sharp and free of pitch; periodic lubrication of the collet and checking runout improves performance and tool life.