3D Filament 3D Prima Copymaster PLA White 1 kg 1.75 mm

Copymaster3D PLA filament in white is a 1 kg, 1.75 mm diameter polylactic acid filament designed for general-purpose 3D printing. Made from biodegradable PLA, the filament emits very low odour and has low shrinkage to reduce warping and deliver accurate prints. The product is compatible with a wide range of desktop and professional 3D printers and is available in many colours from the same range. The spool contains approximately 336 m of filament and supports typical print speeds up to 300 mm/s.

Advantages

Copymaster3D PLA offers consistent diameter tolerance (±0.03 mm) for stable extrusion and good layer adhesion, which helps produce reliable, dimensionally accurate parts. The material is derived from renewable resources and is fully biodegradable, producing minimal fumes during printing. Low shrinkage reduces the need for heated build platforms although a heated bed is recommended for best adhesion. The filament is lightweight and supplied in a 1 kg spool suitable for prototyping, educational use, and artistic applications.

Suitable for

• Rapid prototyping and concept models
• Artistic models, miniatures and decorative prints
• Functional prototypes with moderate strength requirements
• Educational projects and classroom use

Key specifications

• Material: Polylactic Acid (PLA)
• Colour: White
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Approximate length: 336 m
• Diameter tolerance: ±0.03 mm
• Print speed (typical): up to 300 mm/s
• Impact strength: 2.446 kJ/m²
• Tensile modulus: 507.499 MPa
• Package quantity: 1 pc

How to use

Load the 1.75 mm Copymaster3D PLA filament into a compatible FDM/FFF 3D printer following the printer manufacturer's instructions. Typical extrusion temperatures for PLA apply; adjust print temperature and speed according to your printer and the filament behaviour. Although a heated bed is not strictly required, set a moderate bed temperature to improve first-layer adhesion. To aid adhesion and ease part removal, use a suitable build surface agent such as PrimaFIX as recommended by the manufacturer. Allow prints to cool before removing them from the build plate.

Usage recommendations

Store the filament in a dry environment and keep the spool sealed with desiccant when not in use to preserve print quality. Test small calibration prints after changing spool or printer settings to confirm optimal temperature and retraction values.