Audio cable CORDIAL EY 5 WRPP — 3.5 mm male to 2×6.35 mm female, 5 m, black

The CORDIAL EY 5 WRPP is a 5 m Y-adapter cable that converts a single 3.5 mm right-angle stereo output into two 6.35 mm mono inputs. It is designed for splitting stereo signals into separate left and right channels, with a molded bend protection at the 3.5 mm connector for improved durability. The cable uses a single-strand conductor construction and a flexible PVC jacket for balanced flexibility and robustness.

Advantages

The cable features a conductor cross-section equivalent to AWG 26 with single-strand (18 x 0.10 mm) construction and spiral shielding to reduce external interference. Molded bend protection increases the connector's mating cycles and longevity, while the flexible PVC jacket makes routing and handling easier in studio or live environments. Its 5 m length provides extended reach between source and destination.

Suitable for

• Connecting a 3.5 mm headphone or line output to two 6.35 mm mono inputs
• Splitting stereo signals for mixers, amplifiers or recording interfaces
• Use with instruments, headphones or line-level devices in studio and live setups

When it may not be suitable

This adapter splits a stereo 3.5 mm signal into two mono 6.35 mm jacks and does not perform signal summing or active impedance matching. It is not suitable when balanced connections, active conversion, or signal amplification are required. For professional balanced lines or long-distance runs, a different cable or active interface may be necessary.

Key specifications

• Cable length: 5 m
• Connector A: 3.5 mm right-angle stereo male
• Connector B: 2 × 6.35 mm straight mono female
• Conductor construction: single-strand (18 × 0.10 mm), approx. AWG 26 equivalent
• Shielding: spiral shielding
• Jacket material: PVC (black)

How to use

Insert the 3.5 mm right-angle male plug into the source device's headphone or line output. Plug the two 6.35 mm female jacks into the target devices (amplifier channels, mixer inputs or instrument inputs). Ensure devices are powered off or volume is low when connecting to avoid pops. Adjust levels on connected equipment after confirming all connections are secure.

What to consider before purchase

• Requires passive splitting — no active conversion or balancing
• Not intended for long balanced line runs or professional balanced connections
• Ensure connector types and mono/stereo requirements match your devices

Usage recommendations

For best results, use this cable for short to medium runs within a studio or stage setup and keep cable routes away from strong electromagnetic sources. Verify channel wiring on connected gear to ensure correct left/right signal routing.