Audio cable CORDIAL ED 0.5 FM — XLR (3-pin) female to XLR (3-pin) male, 0.5 m, black

The CORDIAL ED 0.5 FM is a 0.5 m professional audio interconnect cable with a female XLR (3-pin) connector to a male XLR (3-pin) connector. It is designed for balanced AES/EBU 110 Ω signal transmission and for general microphone and line-level connections in studios, live sound rigs and broadcast installations. The cable combines a robust PVC jacket with nickel-plated 3-pin XLR connectors to offer dependable performance in everyday use.

Advantages

The cable features 24 AWG conductors (equivalent to a conductor area of 2 x 0.22 mm²) and a double shielding system of twisted copper strands plus an AL/PT foil, providing 100% coverage. This construction preserves signal integrity at 110 Ω characteristic impedance and reduces susceptibility to external interference. Nickel-plated contacts and a hard-wearing PVC jacket increase mechanical durability and resistance to dust and wear in typical professional environments.

Suitable for (tasks / use cases)

• Short patching between microphone and preamp or mixer
• Studio and broadcast line-level connections
• Live sound setups requiring balanced XLR interconnects
• AES/EBU digital audio links that use 3-pin XLR at 110 Ω

When it may not be suitable

This 0.5 m cable is intended for short connections; it is not suitable for long cable runs where greater length and different impedance management are required. It also uses standard 3-pin XLR connectors and therefore is not compatible with equipment that requires other connector types (e.g., TRS, RCA, or 5-pin DMX specific wiring) without adapters.

Key specifications

• Cable length: 0.5 m
• Connectors: female XLR (3-pin) to male XLR (3-pin)
• Conductor size: 2 x 0.22 mm² (approx. 24 AWG)
• Characteristic impedance: 110 Ω
• Shielding: twisted copper strands + AL/PT foil (spiral + foil), 100% coverage
• Jacket material: PVC
• Contact plating: nickel-plated
• Colour: black

How to use

Connect the female XLR end to the output device (for example a microphone or AES/EBU source) and the male XLR end to the input device (preamp, mixer, or recording interface). Ensure connectors are fully seated and latched to avoid intermittent contact. Use this cable for short, balanced connections and avoid sharp bends or excessive tension on the cable to maintain shielding and mechanical integrity.

What to consider before purchase

• Required cable length — 0.5 m is best for short patching only
• Connector compatibility — both ends are 3-pin XLR
• Whether 110 Ω characteristic impedance is required for your AES/EBU digital links
• Environmental demands — PVC jacket offers basic durability but may not suit harsh outdoor conditions

Usage recommendations

Use the CORDIAL ED 0.5 FM for reliable short-distance balanced connections in studio, live and broadcast setups. Store coiled loosely and avoid tight kinks; if using for AES/EBU digital signals, keep runs short and connectors secure for optimal signal integrity.