3D printer filament Creality PLA Hyper blue 1 kg with RFID

Creality PLA Hyper blue is a 1 kg spool of 1.75 mm PLA filament with an integrated RFID tag for printer spool recognition. The Hyper Series formulation combines high fluidity and rapid cooling to support printing speeds up to 600 mm/s while maintaining dimensional precision and improved toughness compared with traditional PLA. It is intended for general-purpose FDM/FFF printing including prototypes, figures and production parts.

Advantages

The filament's high fluidity ensures reliable melting and steady extrusion at high feed rates, while fast cooling stabilizes layer shaping for accurate high-speed prints. Built-in RFID enables easy filament identification and tracking on compatible Creality printers and CFS devices. Higher tensile strength and increased toughness versus standard PLA provide better structural bearing capacity for printed parts.

Suitable for

• Rapid prototyping and functional prototypes
• Figurines and detailed models
• Machine parts and functional components
• Small- to medium-scale mass production with FDM/FFF printers

Key specifications

• Filament diameter: 1.75 ± 0.03 mm
• Spool weight: 1 kg
• Density: 1.25 g/cm³
• Tensile strength (X–Y): 52.991 MPa
• Tensile modulus (X–Y): 1146.064 MPa
• Elongation at break: 6.3%
• Bending strength (X–Y): 92.3 MPa
• Printing temperature: 190–230 °C
• Recommended printing speed: 30–600 mm/s
• Compatibility: FDM/FFF printers supporting PLA and 1.75 mm filament; RFID-enabled spool detection on compatible Creality/CFS devices

How to use

Load the 1.75 mm Creality PLA Hyper blue spool into a compatible FDM/FFF printer and enable spool recognition if the printer supports RFID. Set the nozzle temperature between 190 and 230 °C and start with moderate speeds to dial in extrusion and adhesion, then increase speed toward the intended range (up to 600 mm/s) while monitoring part quality. Use a suitable bed surface or adhesive to reduce warping and ensure first-layer adhesion.

Usage recommendations

For best results, calibrate extrusion multiplier and print cooling when switching to high-speed printing. Use layer cooling fans to take advantage of the filament's rapid cooling properties and consider reducing print acceleration/jerk settings if ringing appears at high speeds.