Anti-wear Graphite Spray CX80 CX-315 Duo Spray 500g

CX80 CX-315 Duo Spray 500g is an anti-wear graphite spray supplied in a 500 g aerosol can that applies a thin, dry graphite lubrication layer. The formulation is designed to reduce friction and wear on metal-to-metal contact points by leaving a dust-resistant, dry film that does not attract contaminants. The product is suitable for maintenance, repair and protection tasks across automotive, industrial and household settings where a dry lubricant is preferred over wet oils.

Advantages

The spray deposits a uniform graphite film that lowers friction and helps prevent seizure and sticking of moving parts. Because it creates a dry, dust-resistant coating, it minimizes contamination buildup compared with conventional oil-based lubricants. The aerosol delivery enables precise, convenient application to hard-to-reach points such as hinges, locks, chains and sliding mechanisms. The product is compatible with typical metal surfaces and intended for use where long-lasting dry lubrication is required.

Suitable for

• Lubrication of hinges, locks and latches
• Protection of chains and gears from wear
• Sliding guides and rails in machinery
• Maintenance of automotive linkages and mechanisms
• Household metal fittings and tools requiring dry lubrication

Key specifications

• Form: aerosol spray delivering a dry graphite film
• Net weight: 500 g can
• Lubricant type: graphite-based dry lubricant
• Application surface: metal contacts, hinges, locks, chains, sliding parts
• Performance: reduces friction and wear; dust-resistant dry coating

How to use

Ensure surfaces are clean, dry and free from heavy grease or loose debris before application. Shake the can well and hold it upright at the recommended spraying distance to achieve an even, thin layer. Apply a light coat to the target metal surfaces and allow the solvent carrier to evaporate so the dry graphite film remains. Reapply as needed where wear appears or at regular maintenance intervals depending on operating conditions.

Usage recommendations

Use in well-ventilated areas and avoid inhalation of vapours. Do not apply to hot surfaces or near open flames. Test on a small inconspicuous area if surface compatibility is uncertain. Store the aerosol in a cool, dry place away from direct heat sources and dispose of the empty can according to local regulations.