Rust remover and lubricant spray CX80 CX-374 500 ml for steel and toothed mechanisms, dual-action (duo spray)

CX80 CX-374 500 ml dual-action rust remover and lubricant spray is formulated for use on steel parts and toothed mechanisms. The aerosol delivers a penetrating action to loosen seized bolts, nuts, joints and corroded fittings while leaving a lubricating film that reduces friction on moving gears, chains and bearings. The product is intended for maintenance, repair and workshop use where both corrosion treatment and light lubrication are required on metal surfaces.

Advantages

The dual-action formula combines penetrating solvent action with a thin, long-lasting lubricant layer, enabling both rust release and subsequent protection in a single application. The aerosol delivery ensures targeted application in tight spaces and between gear teeth. The lubricant film reduces wear and helps prevent re-corrosion on treated surfaces exposed to typical workshop and industrial environments.

Suitable for

• Chains and sprockets in light industrial and workshop settings
• Hinges, locks and fasteners that have become seized by rust
• Gear trains, toothed mechanisms and small bearings requiring light lubrication
• Maintenance and repair tasks on steel parts where penetration and lubrication are needed

Key specifications

• Form: aerosol spray, 500 ml can
• Action: dual — penetrating rust remover plus lubricating film
• Material compatibility: formulated for steel and metal mechanisms
• Application areas: chains, sprockets, hinges, fasteners, toothed mechanisms
• Typical properties: low-viscosity penetration followed by thin protective lubricant

How to use

Shake the can briefly before use. Hold the aerosol nozzle 10–20 cm from the surface and apply a short, controlled spray to the rusted or seized area. Allow time for the penetrating action to work; for heavily seized fasteners, apply and wait several minutes or repeat as necessary. After penetration, operate the mechanism or attempt to loosen the fastener; the residual lubricating film will reduce friction and protect the surface. For chains and gears, apply a light, even coating and wipe off excess if necessary to avoid collecting dirt.

Usage recommendations

Use in well-ventilated areas and avoid direct inhalation of spray. Test on a small, inconspicuous area if surface compatibility is uncertain. Keep away from ignition sources and follow local regulations for aerosol disposal.