Wireless access point D-Link Nuclias Connect BE9500 Wi‑Fi 7, tri-band 2.4/5/6 GHz, 10/100/1000/10000 Mbps, PoE, 2x RJ-45, white

D-Link Nuclias Connect BE9500 is a Wi‑Fi 7 access point designed for indoor deployment. It supports tri‑band operation across 2.4 GHz, 5 GHz and 6 GHz bands and delivers combined multi‑band throughput up to 11 Gbps. The unit is white, intended for ceiling or wall mounting in business or managed network environments and supports Power over Ethernet for installation flexibility.

Advantages

Wi‑Fi 7 introduces wider channel bandwidth, higher modulation and improved multi‑link and multi‑resource unit operation to increase throughput and efficiency. This access point offers ultra‑wide 320 MHz channels on supported bands, 4096‑QAM modulation and tri‑band aggregation to deliver significantly higher wireless capacity and lower latency compared with previous Wi‑Fi generations. PoE support and compact internal antenna design simplify installation and integration into existing network infrastructure.

Suitable for

• Enterprise and SMB wireless networks
• High‑density environments such as conference rooms and classrooms
• Low‑latency applications including video conferencing and real‑time collaboration
• Wireless backhaul or high‑capacity client aggregation

Key specifications

• Wi‑Fi standard: IEEE 802.11be (Wi‑Fi 7) with backward compatibility to 802.11ax/ac/n/a/b/g
• Tri‑band radio: simultaneous 2.4 GHz, 5 GHz and 6 GHz operation
• Maximum aggregate throughput: up to 11 Gbps (combined across bands)
• Per‑band data rates (indicative): 2.4 GHz approx. 574 Mbps, 5 GHz up to 4320 Mbps, 6 GHz up to 5760 Mbps
• Channel bandwidth: support for up to 320 MHz on supported bands
• Modulation: up to 4096‑QAM
• Ports: two Ethernet RJ‑45 ports with 1x 10G PoE (802.3bt) and 1x 1G
• Power: Power over Ethernet (PoE) support (802.3bt)
• Form factor: indoor access point with internal antennas, white enclosure

How to use

Mount the access point indoors on a ceiling or wall near a network switch that provides PoE. Connect the main RJ‑45 port to a PoE‑capable switch or injector to power the device and provide network connectivity. Configure the device using the Nuclias Connect management interface or compatible controller software to set SSIDs, security, radio settings and band steering according to site requirements. Ensure firmware is up to date before deployment.

Usage recommendations

For best performance, place the access point centrally in the coverage area, avoid physical obstructions near the device, and enable multi‑link operation and appropriate channel planning to leverage 6 GHz capacity where client devices support Wi‑Fi 7. Use PoE with a switch that complies with 802.3bt to ensure full functionality.