Video intercom DAHUA VTO4202F-P-S3 2 MP, 1080p, IR, MicroSD up to 256 GB, IP65, IK07, Silver

DAHUA VTO4202F-P-S3 is a 2 MP video intercom station designed for outdoor access control and visitor communication. The unit delivers up to 1920×1080 resolution with support for 720p and 1080p modes, a wide-angle 168.6° CMOS camera, infrared illumination for night vision and support for H.265/H.264 video compression. Constructed with an anodized aluminum front panel and rated IP65 and IK07 for weather and impact resistance, the device supports both surface and flush mounting and offers local storage via MicroSD up to 256 GB. It provides flexible power options including PoE and 12 VDC output for connected loads when paired with a compatible PSE switch.

Advantages

The intercom combines high-definition video with low-light performance and built-in IR to ensure clear identification of visitors day and night. Durable materials and ingress/impact protection enable reliable outdoor installation. Built-in speakerphone and common audio codecs (G.711a/G.711u/PCM) deliver two-way voice communication, while mobile app support allows remote answering and door release. H.265/H.264 compression and local MicroSD storage reduce network load and provide on-site recording options.

Suitable for

• Residential gated entries and apartment building entrances
• Commercial premises and office access control
• Small- to medium-sized facilities requiring outdoor visitor communication
• Locations needing vandal-resistant and weatherproof intercom hardware

Key specifications

• Image sensor: 2 MP CMOS, 25 fps
• Resolution: up to 1920×1080 (supports 720p and 1080p)
• Field of view: 168.6° wide-angle
• Night vision: IR LEDs for low-light imaging
• Video compression: H.265 and H.264
• Audio: Built-in speakerphone; audio codecs G.711a/G.711u/PCM
• Local storage: MicroSD (TransFlash) support up to 256 GB
• Ingress protection: IP65; impact protection: IK07
• Front panel material: Anodized aluminum
• Power options: 12 VDC output (600 mA) and standard PoE; requires 802.3.at PSE for charging connected loads
• Mounting: Surface and flush mount supported
• Additional imaging: Wide Dynamic Range (WDR)
• Color: Silver

How to use

Install the intercom at the desired outdoor location using surface or flush mounting following the manufacturer’s quick start guide and ensuring silicone sealant is applied to the shell where indicated for proper ingress protection. Connect network and power: use PoE for single-cable power and data or supply 12 VDC as specified. Insert a MicroSD card (up to 256 GB) for local recording if required. Configure video and audio settings through the management interface or companion mobile app, pair the device with the access control system or electric lock, and set up app accounts for remote answering and door release.

Usage recommendations

For reliable outdoor performance, follow installation notes for sealing and mounting, use a PoE switch that complies with IEEE 802.3at when the device must power external loads, and format MicroSD cards according to the manufacturer’s instructions. Regularly check firmware updates and keep the mobile app configured with secure access credentials.