Rotary tool sanding/grinding bit Dedra 07F024C for wood, shank 1.2 cm, working Ø 2 cm

Dedra 07F024C is a sanding and grinding bit for rotary tools, designed specifically for work on wood. With a 1.2 cm shank and a 2 cm working diameter, the single-piece accessory provides a compact cutting profile for shaping, smoothing and detail sanding. It is intended for use with compatible rotary tools where precise, light material removal and finishing on wooden surfaces are required.

Advantages

The bit combines a narrow shank with a moderate working diameter to allow access to tighter areas while maintaining control during use. Its geometry is suitable for finishing edges, contours and small recessed areas without aggressive stock removal. As a dedicated wood sanding/grinding accessory, it minimizes tear-out and helps produce a consistent surface texture on soft and hardwoods when used with appropriate speed and pressure.

Suitable for

• Shaping and profiling wooden edges and contours
• Detail sanding of carvings, grooves and recesses
• Removing small amounts of material for fitting or adjustment
• Surface smoothing before finishing or painting

Key specifications

• Shank diameter: 1.2 cm
• Working (head) diameter: 2 cm
• Material compatibility: wood (soft and hard)
• Sold as: single piece

How to use

Secure the bit in the chuck of a compatible rotary tool, ensuring the 1.2 cm shank is properly tightened. Select a moderate rotational speed appropriate for wood; begin with a lower speed and increase as needed while keeping light, steady pressure. Move the bit smoothly along the workpiece to shape or sand, avoiding prolonged dwell in one spot to prevent burning or gouging. For best results, make several light passes rather than attempting heavy material removal in a single pass.

Usage recommendations

Use personal protective equipment such as safety glasses and a dust mask. Test the bit on a scrap piece of the same wood before working on the final piece. Clean and inspect the bit periodically during extended use and replace if abrasive surface is worn or damaged. Choose appropriate tool speed and feed to match wood species and desired finish.