Roofing tongs Dedra 45° bent 260 mm model 12P005

Dedra roofing tongs 45° bent 260 mm model 12P005 are manual hand tools designed for gripping, bending and shaping roofing materials and sheet metal. With a 45° bent head and a 260 mm overall length, these tongs provide reach and leverage for working on tiles, flashing, gutters and other sheet metal components during installation, adjustment or repair tasks on roofs. The tool's solid construction supports controlled manual metalworking where precise bending and secure holding of thin metal sheets are required.

Advantages

The 45° bent head geometry allows easier access to angled seams and tight spaces on roof assemblies while maintaining good visibility of the work area. At 260 mm length the tongs balance reach and hand control, giving leverage for bending operations without excessive force. A sturdy construction and well-formed jaw surfaces ensure reliable grip on sheet materials and reduce slippage during shaping and folding tasks. The tool is hand-sized for single-person operation and does not require power sources, making it suitable for site work and maintenance where portability and simplicity are important.

Suitable for

• Bending and shaping roofing sheets and flashings
• Gripping and holding metal panels during installation or repair
• Adjusting gutters, trims and roof edge details
• Small on-site sheet metal work and maintenance tasks

Key specifications

• Head angle: 45° bent
• Overall length: 260 mm
• Tool type: manual roofing tongs for sheet metal
• Primary use: gripping, bending and shaping roofing materials
• Construction: durable metal body designed for hand-operated metalworking

How to use

Position the bent jaws around the sheet area to be bent or held, ensuring the contact surfaces align with the intended bend line or grip point. Apply steady hand force to close or manipulate the jaws, using the tool’s leverage to form a controlled bend or to hold the material in place while fixing fasteners. For gripping or pulling tasks, keep a secure handhold on the handles and work gradually to avoid over-bending thin materials. After use, wipe the tool clean of debris and store in a dry tool bag or toolbox.

Usage recommendations

Use personal protective equipment such as gloves and eye protection when working with sheet metal. Select an appropriate bending approach for material thickness and type to avoid creasing or cracking; practice on scrap pieces if needed. Regularly inspect the jaws for wear and maintain a clean contact surface to ensure consistent grip and shaping performance.