Abrasive sanding mesh Dedra 105x280 mm grit 180 (model 1541-180)

Dedra abrasive sanding mesh 105 x 280 mm with grit 180 is a perforated, mesh-backed abrasive designed for medium-fine sanding and finishing of wood, painted surfaces, plaster and composite materials. The open mesh construction allows dust to pass through and improves extraction efficiency when used with compatible sanding tools or vacuum-assisted setups. The 180 grit provides controlled material removal while leaving a surface suitable for subsequent priming or finishing.

Advantages

The mesh-backed construction reduces clogging and extends abrasive life by allowing dust to escape, and the uniform grit distribution ensures consistent sanding results across the working area. Its dimensions fit common palm and detail sanders as well as manual sanding blocks, and the 180 grit balances cutting speed with surface refinement for preparation before painting or sealing.

Suitable for

• Sanding and finishing raw and treated wood
• Preparing painted or varnished surfaces for recoat
• Smoothing plaster, filler and composite surfaces
• Hand sanding and use with compatible orbital or detail sanders with dust extraction

When it may not be suitable

This 180-grit mesh is intended for medium-fine material removal and preparation; it is not suitable where very aggressive stock removal is required or where ultra-fine polishing is needed. For heavy material removal choose a coarser grit; for mirror-smooth finishes use finer abrasives and polishing compounds.

Key specifications

• Dimensions: 105 x 280 mm
• Abrasion grade: 180 grit (medium-fine)
• Backing type: perforated mesh for improved dust passage
• Typical applications: wood, paint, plaster, composites

How to use

Select the 180-grit mesh when you need medium-fine sanding or when preparing a surface for priming and finishing. Attach the mesh to a compatible sanding pad or use by hand with even pressure, moving in the direction appropriate for the material to avoid swirl marks. When using with a powered sander, connect to a dust extraction system or vacuum to take advantage of the perforated mesh and reduce airborne dust. Replace the mesh when performance decreases or if the mesh becomes torn or heavily clogged.

What to consider before purchase

• Ensure 105 x 280 mm fits your sander or sanding pad
• Confirm 180 grit is appropriate for the intended finishing step
• Check whether your sander supports perforated or mesh-backed abrasives and dust extraction

Usage recommendations

Use progressive grit steps when refining a surface: start with coarser abrasives if needed, then finish with 180 grit for a smooth, paint-ready surface. Maintain steady pressure and keep the sander moving to avoid uneven wear.