Solder wire Dedra Pb60Sn40 1 mm 100 g spool 31L61010

Solder wire Dedra Pb60Sn40 1 mm 100 g spool is a flux-cored solder designed for manual soldering in electronics, electrical connections and metal repair. The alloy composition of 60% lead and 40% tin provides a melting range and mechanical properties suitable for general-purpose joints where Pb60Sn40 is acceptable. The product comes wound on a compact spool for controlled feeding and includes an internal flux core to improve wetting and reduce oxidation during soldering.

Advantages

This solder wire combines predictable melting characteristics with good wetting behavior due to the integrated flux core, enabling reliable formation of solder joints. The 1 mm diameter balances ease of handling and heat transfer for common hand-soldering tasks. The 100 g spool format offers a practical quantity for workshops and hobbyists while the spool aids consistent wire feed and neat storage.

Suitable for

• Manual electronic soldering on through-hole components and wires
• Electrical connection repair and terminal soldering
• Small metal repairs and joining thin metal parts
• Hobbyist and light workshop assembly tasks

Key specifications

• Alloy composition: 60% lead, 40% tin (Pb60Sn40)
• Core type: flux-cored solder (integrated flux)
• Diameter: 1 mm
• Net weight: 100 g on spool
• Form: wire on a compact spool for controlled dispensing

How to use

Prepare the workpiece by cleaning contact areas from dirt, oxidation and old solder. Heat the joint with an appropriate soldering iron until both parts reach soldering temperature, then feed the Dedra Pb60Sn40 wire to the heated area so the solder melts and flows into the joint. Allow the solder to wet the surfaces and form a smooth fillet; remove heat and let the joint cool undisturbed. If necessary, clean residual flux according to the flux type and the specific application requirements.

Usage recommendations

Use adequate ventilation and personal protective equipment when soldering with lead-containing alloys. Observe local regulations for handling and disposal of lead-containing materials. Choose soldering iron tip size and temperature appropriate for 1 mm wire and the components being soldered to avoid thermal damage.